|
Facilità d'uso
2. Press and hold (mute) and Menu until the device key (e.g., TV) blinks twice (it will blink once then twice). 3. Press . 4. Press the (volume down) key. 14 5. The light blinks 4 times. Now, after you select a device that has volume unlocked (e.g., MEDIA), pressing the or (volume up or down) keys, or (mute), will control only that device’s volume. Unlocking All Volume Control (Restoring Global Unlock) Performing these instructions will set independent volume control for all programmed devices. 1. Press and hold (mute) and Menu until the device key (e.g., TV) blinks twice (it will blink once then twice). 3. Press . 4. Press the (volume up) key. 5. The mode key blinks 4 times. Now, when you press the or (volume up or down) keys, or (mute), the volume of the selected device (e.g., TV) is controlled regardless of mode. 15 Input Lock The ARi3G’s input lock feature switches your TV or audio device automatically to the correct input when you press the Input key in Media mode. For example, if you have your media device connected to the HDMI1 input on your TV, the ARi3G tells the TV to go to the HDMI1 input when you press the Input key in Media mode. To use this capability on your ARi3G, your TV or audio device must have direct input capability. If your devices’ original remote control has keys for individual inputs (like ‘Video 1’ or ‘HDMI 1’) you can use this feature. IMPORTANT: Once you’ve set the input lock, the Input key no longer toggles through inputs (unless you reset the remote following the instructions on page 19). To go to a specific input: 1. Press the device key for the device you use to switch inputs (e.g., AUD). 2. Press and hold (mute) and Menu until the mode key blinks twice, then release both keys. 3. Press . 4. Press Input repeatedly until the device lands on the correct input signal. 5. When you’re done, press and hold Menu to store the specific key command to go directly to this input. 16 Using Master Power On/Off The ARi3G remote has a unique feature that allows you to sequentially turn up to 3 of your home entertainment devices on or off with a single key press. NOTE: MASTER POWER only works in the MEDIA mode. To set the MASTER POWER key: 1. Press the MEDIA key. 2. Press and hold (mute) and Menu until the mode key blinks twice, then release both keys. 3. Press . 4. Press (power). 5. For each device you wish to add to the power sequence, press the mode key (e.g., TV, AUD, etc.). 6. When you’re finished, press and hold Menu until the active mode key blinks once and remains lit (it goes off when you release Menu). To clear the MASTER POWER key: 1. Press the MEDIA key. 2. Press and hold (mute) and Menu until the mode key blinks twice, then release both keys. 17 3. Press . 4. Press (power). 5. When you’re finished, press and hold Menu until MEDIA blinks once and remains lit (it goes off when you release Menu). The Tilt Switch Your ARi3G remote is equipped with a tilt switch that automatically enables electroluminescent (EL) backlighting of your remote whenever you move it. By default the tilt switch is enabled. To Disable the Tilt Switch: 1. Press and hold (mute) and Menu until the backlighting blinks twice, then release both keys. 2. Press . The backlighting flashes twice. The tilt switch is now deactivated: the backlighting turns on only when a key is pressed. 18 To Enable the Tilt Switch 1. Press and hold (mute) and Menu until the backlighting blinks twice, then release. 2. Press . The backlighting flashes four times. The tilt switch is now activated: the backlighting will come on when you move the remote. Resetting Your Remote To reset all the functions of the remote control to the factory defaults (the original, out-of-the-box settings), follow these steps: 1. Press and hold the (mute) and Menu keys at the same time until the backlighting flashes twice, then release both keys. 2. Press . The MEDIA key flashes 4 times to confirm that your remote has been reset to factory default settings. 19 Pairing Pairing Apple TV with the ARi3G Remote 1. Choose Settings from the Apple TV main menu. 2. Choose Pair Remote Control. When you’ve successfully paired your Apple Remote, Apple TV displays a chainlink symbol above a picture of a remote. Apple TV now works only with the paired remote. NOTE: The ARi3G remote has the same pairing code for all remotes. The ARi3G remote does not support dual key press pairing. Unpairing Apple TV and the ARi3G Remote 1. Use the same remote as the Apple TV was paired with. 2. Choose Settings from the Apple TV main menu. 3. Choose Unpair Remote. NOTE: If you’ve lost the paired remote, refer to the AppleTV troubleshooting guide. You will need to use the original remote to unpair. When you’ve successfully unpaired the remote, Apple TV displays a broken chainlink symbol above a picture of a remote. You can now pair Apple TV with a new remote. 20 TROUBLESHOOTING Many problems you may encounter with the remote can be resolved quickly and easily by following simple steps. If the ...
Questo manuale è adatto anche per i modelli :Controllo remoto - ARi3G (1000.97 kb)