valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
It is possible that you must enter another code for the device. 4. Extra possibilities Adjusting device selection (Mode selector) The SRU560 is default set for operating TV,VCR, CD, DVD, SAT (settop box, satellite or cable decoder) and AMP (amplifier).You can select the device you wish to operate with the SELECT key (mode selector). Each option allows operation of one device only. If desired, you can program the SELECT key (mode selector) to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the DVD key for a second TV. 1 Switch on the second TV. 2 Press the SELECT key to select SAT. Press the key until SAT lights up in the selector window. 3 Then keep keys 1 and 6 on the SRU560 pressed simultaneously for three seconds, until SAT in the selector window lights up. 4 Press keys 9, 9 and 2 in that order. 5 Press the SELECT key to select TV. Press the key until the light around the Standby key lights up. 8 Instructions for use 6 Press the 1 key. – SAT in the selector window flashes twice. SAT will now allow you to operate your second TV. 7 Program the SRU560 to operate the second TV. See ‘Setting the remote control’. Adding a function to the remote control If you want to add a function to the SRU560, you can contact the Philips ser vice line for Universal Remote Control to ask for the 5-figure code for the extra function. Assign Volume control to another mode The volume controls (Volume +,Volume - and s) on the SRU560 are assigned to either your TV or your amplifier/receiver, depending on the device you have selected; MODE VOLUME CONTROLS TV mode selected ............................Volume controls work with TV DVD mode selected .......................Volume controls work with TV SAT mode selected ..........................Volume controls work with TV VCR mode selected.........................Volume controls work with TV CD mode selected ...........................Volume controls work with amplifier/ receiver AMP mode selected ........................Volume controls work with amplifier/ receiver If you want a different setup, the volume control assignment can be changed. Example: In SAT mode you want to operate the amplifier/receiver volume control 1 Press the SELECT key to select SAT. Press the key until SAT lights up in the selector window. 2 Then keep keys 1 and 6 on the SRU560 pressed simultaneously for three seconds, until SAT in the selector window flashes twice and then remains lit. 3 Press keys 9, 9 and 3 in that order. 4 Press the SELECT key to select AMP. Press the key until AMP lights up in the selector window. English 9 Instructions for use Restoring the original functions of your remote control English 1 Keep keys 1 and 6 on the SRU560 pressed simultaneously for three seconds, until until one of the device indicators (TV, DVD, SAT, VCR, CD, AMP) lights up window. 2 Press keys 9, 8 and 1, in that order. – The device indicator flashes twice. All original functions have now been restored and any extra functions have been deleted. 5. Troubleshooting • Problem – Solution • The device indicators in the selector window (DVD, SAT, VCR, CD and AMP) and the Standby key blink four times after ever y key press. – The remote control is indicating that its batteries are running low. Replace the old batteries with two new AAA batteries. • The device you want to operate does not respond and it’s indicatior in the selector window does not flash when you press a key. – Replace the old batteries with two new AAA batteries. • The device you want to operate does not respond but it’s indicatior in the selector window does flash when a key is pressed. – Point the SRU560 at the device and make sure that there are no obstructions between the SRU560 and the device. • The SRU560 does not respond properly to commands. – Maybe you are using the wrong code. Tr y programming the SRU560 again using another code, which is mentioned under the brand of your device, or reset for automatic search to find the right code. If the device still does not respond, call our helpline. • The Teletext keys do not work. – Find out whether your TV is equipped with Teletext. • You have difficulties operating all of the functions on your device. – Maybe the SRU560 has to be adapted to the model of the device. Call our helpline for details. • Your brand of device is not in the code list. – Tr y to set the SRU560 automatically. See ‘Automatically setting the remote control’. • None of the codes works during manual setting of the remote control. – If that is the case, follow the instructions under ‘Automatically setting the remote control’. 10 Instructions for use 6. Need help? If you have any questions about the SRU560, you can always contact us. You will find our contact details after the code list at the back of this manual. Read this manual carefully before you make a call.You can solve most of the problems yourself. If you cannot find any answers to your proble...