valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Notes ..Do not leave the Remote Commander in direct sunlight, near heaters, or in locations with high humidity. ..When inserting or pulling the plug, be sure to do so in a straight line. Performing this operation forcibly may damage either the plug or the unit connected. ..When you use the shutter lock function, be sure to release the lock after shooting. Identifying the parts (See illustration .) 1 Plug 2 Guides 3 Release button . Attaching the Remote Commander (See illustration .) 1 Open the REMOTE (remote release) terminal cover of the camera. 2 Align the plug on the guide of the camera and then insert the plug in the REMOTE (remote release) terminal on the camera. . Setting the camera to record images Refer to the operating instructions of the unit used with the Remote Commander for further information. . Using the Remote Commander to shoot 1 Press the release button halfway down to focus. 2 After checking the focus indicator of the finder, press the release button firmly. 3 1 2 ... .................... .............................. .............................. .............................. .................. .... .. REMOTE(........).............. ...(.....)........ .............................. ............................ ................. .............................. ..... ....... .............................. ....................... .............................. ................. .............................. .................. .....(.......) 1 ..... 2 .... 3 ....... . ........(.......) 1 ....REMOTE(........)......... . 2 .......................REMOTE (........)....... . ........... ........................... . ....... 2-687-958-21(1) RM-S1AM RM-L1AM © 2006 Sony Corporation Printed in China ..... Operating Instructions Mode d’emploi Bedienungsanleitung Manual de instrucciones Gebruiksaanwijzing ......... Remote Commander Telecommande Пульт дистанционного управления Bruksanvisning Istruzioni per I’uso Manual de instrucoes ..When shooting a subject that is very dark or hard to autofocus, set the camera focus mode switch to "MF (Manual Focus)," and then turn the focusing ring to focus on the subject. Remote control Remote control does not confirm that the intended subject is in focus. Use the following procedure to check whether a subject is properly focused. 1 Focus on the subject. 2 Switch the focus mode switch to "MF (Manual Focus)." ..The focus is locked. 3 Compose the picture. 4 Press the release button firmly to shoot the picture. ..Use the eyepiece cover, etc. to prevent light from entering the finder. Shutter lock function (See illustration .) Use this function in the bulb or sequential shooting mode to lock focus. Keep pressing the release button until it stops and slide it in the direction of the arrow. ..The shutter remains open when locked in the bulb mode. ..The shutter keeps opening and closing when locked in sequential shooting. Remote Commander Clip (See illustration .) If the accessory remote commander clip i...