valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
When using etectrica[ Rug shampooer/ftoor potisher, basic precautions should be followed. Inctuding the fottowing READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE To reduce risk of fire, electric shock, or injury • DO NOT USE FLAMABLE OR COMBUSTIBLE LIQUIDS, SUCH AS GASOLINE, OR USE IN AREAS WHERE THEY MAY BE PRESENT. • Do not reave this apptiance when ptugged in. • To reduce the risk of etectric shock-Use indoors onty. • This apptiance is provided with doubte insutated. Use onty identica[ reptacements parts. See instructions for servicing of doubte-insutated apptiances_ • Do not inmerse. To reduce risk of etectric shock -Use onty carpet moistened by cteaning process. • to reduce the risk of fire, use onty commercially avai[abte ftoor cleaners and waxes intended for machine app[ication. • Unplug from outtet when not in use and before servicing° • Do not arrow to be used as a toy. Ctose attention is necessary when used by or near chitdren. • Use only as described in this manuat. Use onty manufacturer's recommended attachments_ • Do not use with damage cord or ptug. if apptiance is not working, as it should, have been dropped, damage, left outdoors dropped into water, return it to service center before using. • Do not putt or carry by cord, use cord as a handte, ctose a door on cord, or putt a cord around sharp edges or corners. Do not run apptiance over cord, keep cordaway from heated surfaces_ • Do not unptug by putting on cord. To unptug, grasp the ptug, not the cord. • Do not handte ptug with wet hands. • Do not put any object into openings. Do not use with any openings btocked; keep free of dust, tint, hair, and anything that may reduce atrftow. ° Keep hair, loose c|othing, fingers, and art parts of body away from opening and moving parts. • Do not attach or remove brushes with etectHc cord ptugged in. • Turn-off before unptugging. • Use extra care when cteaning on stairs. • Never flit dispenser without removing it from the apptiance. • Never turn the apptiance an with the handte in the upright position_ Make sure handte is in operating position. • Disassembty of this unit can be hazardous. ° Do not leave turned on when it is not in motion. SERVICING OF DOUBLE-INSULATED APPLIANCES A doubte-insutated apptiance is marked with one or more of the fottowing: The words "DOUBLE INSULATION" or 'DOUBLE INSULATED" or the doubte insutation symbot (square within a square.) In a double-insutated apptiance, two systems of insutation are provided instead of grounding. No grounding means is provided on a doubte-insutated apptiance_ nor shoutd a means for grounding be abte to the apptiance, Servicing a doubte-insutated apptiance requires extremecare and knowtedge of the system, and shoutd be done onb' by quatified service personnet. Reptacements parts for a doubte-insutated apptiance must be identicat to the part they reptace. Polarization Instructions: To reduce the risk of etectric shock, this apptiance has a potarized ptug (one blade is wider than the other). This ptug witt fit in a potaHzed outtet 0ntY one way. If the ptug does not fit furry in the outtet, reverse the ptug. if stitt does not fit, contact a quatified etectrician to insta[t the proper outtet. Do not change the ptug in any way. ,SEARS Dear Homemaker: You have just invested in a fine Kenmore Rug Shampooer-,Ftoor Polisher. Before using your new Kenmore machine, please pause for a moment and carefully read this booklet, which contains instructions on how to operate and care for your machine. Specific instructions are given on rug shampooing, scrubbing, polishing, attachin8 and cleaning brushes, etc. This wi[[ help you to obtain the best performance and avoid unnecessary service expense for conditions beyond our control Eli DO NOT PLUG IN ELECTRIC CORD UNTIL BRUSHES OR OTHER ACCESORIES HAVE BEEN ATTACHED AND SWITCH HAS BEEN PLACED IN THE "OFF" POSITION. HANDLE, SWITCH BOX AND CORD I. Place Lower handle tube (Fig. i) into handle tube socket "A" (Fig. 2). Fasten using bolt "B" and internally threaded nut "C" (Fig. 3) provided in the hardware package. If the handle tube is difficult to assemble (tight), insert blade of screwdriver into sl.ot (Fig. 4) at rear of handle tube socket and twist screwdriver gently while inserting handle tube. 2. Place upper half handle tube (Fig. 1) over tower half. Align holes and fasten with remaining bolt "B" and internally threaded nut "C". 3. Attach switch box to rear of upper handle tube. Place switch box tab (no hole) into rectangular hole (Fig° 5). Position box against handle tube. Fasten using the small screw provided in the hardware package. DO NOT OVERTIGHTEN. 4. The motor cord, which goes from the switch box to the bottom of the unit, is attached in two (2) locations behind the dispenser at top and bottom° The upper part of the motor cord is snapped into place alongside the upper cord hook on the dispenser top (Fig 6). The lower part of the motor cord is snapped into place between the two tower cord hooks. They are loca...