valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
Unplug from outlet when not in use and before servicing. 2. To reduce the risk of fire, electric shock - DO NOT use outdoors or on wet surfaces. 3. DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. 4. Use only as described in this manual. Use only manufacturer's recommended attachments. 5. DO NOT use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized Panasonic Servicenter. 6. DO NOT pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. DO NOT run vacuum cleaner over cord. Keep cord away from heated surfaces. 7. DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord. 8. DO NOT handle plug or vacuum cleaner with wet hands. 9. DO NOT put any objects into openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. 10. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 11. DO NOT pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 12. DO NOT use without dust bag and/or filters in place. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 15. DO NOT use cleaner to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. SAVE THESE INSTRUCTIONS THIS VACUUM CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY Note: Before you plug in your Panasonic vacuum cleaner, make sure that the voltage indicated on the rating plate located at the back of the vacuum cleaner is the same as your local supply. -4- PARTS IDENTIFICATION On/Off Switch (3- Position) Hoso Wand Crevice Tool Dirt Sensor Smart Handle™ Control Dust Cover (Dust Bag Inside) Secondary Filter (Inside Dust Compartment) Exhaust Filter (Inside Dust Cover) Headlight Nozzle Furniture Guard Carpet/Bare Floor Selector • Handle Release Pedal FEATURE CHART (PANASONIC UPRIGHT VACUUM CLEANER) ^-^EATURES Model \ POWER DIRT SENSOR HEADUGHT CORD LENGTH BARE FLOOR ОРЛОМ MC-V7395 120V. AC(60Hz) 12.0 Amps Yes Yes 35 Ft. Yes TO ASSEMBLE CLEANER A WARNING Electrical Shock Hazard. DO NOT plug into electrical supply until assembly Is complete. Failure to do so could result In electrical shock or injury. ATTACHING HANDLE TO VACUUM C R The vacuum cleaner main body and handle are packed separately. 1. The handle screw has been installed for shipping purposes. Please remove the screw before inserting the handle. Insert the handle as shown in the illustration. Make sure the ON/OFF switch Is in the OFF position before installing. 2. Insert the screw that you have removed. Be sure the screw is tightened, but not overtightened. 3. There are two (2) recessed areas located on the handle, as shown in the illustration, designed to secure the power cord during vacuuming. Always push the power cord down into these recessed areas to help keep the power cord from hanging near the nozzle and being damaged by the agitator. 4. Loosely wrap the power cord around the quick release cord hook and the lower cord retainer. Secure the plug head to the cord by pushing the power cord into the retainer on the plug head. Retainer (Plug Head) USING THE CORD HOOK 1. The upper cord hook has BJja a quick-release action. To S nil release the power cord, |4r/ rotate the hook downward MoL and the complete power 9,°^. cord will drop off the hook for immediate use. gmrraRx/V- 2. DO NOT unplug the /¡Tin power cord by pulling on the f J // cord. Grasp the plug OIL// head and pull to unplug the ¡Ls vacuum cleaner. // Return the hook to the //1 |h upright position before / / y attempting to rewind the i I II cord. j / L£J ATTACHMENT ASSEMBLY, Tools-on-Board A CAUTION DO NOT get the power cord caught under the nozzle when using the vacuum or attachments as it can be damaged by the agitator as it revolves. ATTACHMENTS Dusting Brush - The attachments should be conveniently positioned on the back and side of the cleaner for easy access. Some of the attachments may already be assembled. Assemble the hose and attachments to the cleaner as follows: Hose Holder Place the hose in back of the handle on the hose holder. Attach the wand to the hose by aligning the two (2) raised tabs on the wand with the “J" slots in the hose. After guiding the tabs along the grooves, twist to lock in place. Place the wand in the rear slot of the tool holder, twisting and pushing down over the short hose to assure a good connection. Hose Store the other wand, dusting brush, and the upholstery tool in the rear of the dust compartment in their proper locations. Place the crevice tool into the front slot of the tool holder. Refer to the illustration in the PARTS Dusting IDENTIFICATION section for correct attachment stor- Brush age. Upholstery Tool Nozz...