valutazioni - 2, GPA: 4 ( )

Produttore : Samsung File Size : 382.51 kb File Nome : Lingua di insegnamento:

Note: If the cleaner is difficult to push, rotate knob to the next higher setting. Handle positions The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating for general operation on carpet and floors; low for reaching under low furniture. Step on handle release pedal to lower handle. Transporting cleaner To move your cleaner from room to room, put the handle in upright position, tilt the cleaner back on its rear wheels and push forward. When using the attachments, ensure the vacuum cleaner is placed firmly on the floor with the handle in the upright position. Do not place the vacuum on top of furniture or steps as the brushroller may cause damage. A. Combination tool: Two types of cleaning tools are included in one attachment: rotate for desired tool. •Use brush side to dust furniture, blinds, books, lamps, shelves. •Use upholstery side for curtains, draperies, cushions, fabrics. B. Crevice tool: Use in corners, on stairs, baseboards, and behind furniture. C. Extension Wand: Use with desired attachments and narrow wand for a longer reach. •option : Mini Turbo Brush Refer to the separated instruction. 3 A B C •option Maintenance Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. When to empty the Dirt Cup The dirt cup needs to be emptied when the dirt reaches the "Full" line on the side of the Cup. If more dirt than this accumulates, your cleaner will not operate effectively. Note: All new carpet has loose fibers which can fill the Dirt Cup quickly while vacuuming. Emptying the Dirt Cup Disconnect cleaner from electrical outlet. 3-1 3-2 3-3 Unlock Position Lock Position Full Line Slide the Cyclone-Lever to the Empty dirt into garbage container. Cleaning The Circular Filters. "Unlock" position. Put the Dirt Cup back in the Grasp the Filter Cup located atGrasp handle and pull the Dirt vacuum and slide the lever to the the bottom of the Dirt Cup and twistCup straight out to remove from "Lock" position. counterclockwise to unlock and Vacuum. remove. Cleaning the Pre/Post-motor Filter 3-4 3-5 3-6 Pre-Motor Filter Post-Motor Filter How to clean Disconnect cleaner from electrical outlet. The Pre-Motor Filter protects the Motor from debris. It is located underneath the Dirt Cup and Filter Cup in the Center of the round part of the Cyclone-Lever. Remove the small round Filter and any debris on top of it. Rinse well under warm water, then air dry thoroughly before replacing. The Post-Motor Filter assists in the filtation process to return clean air to the room. It is located behind the door on the front of the Cleaner. When the filter becomes dirty, open the door, remove the filter and shake the dust off the filter.The Post- Motor Filter is non-washable therefore do not wash it in water. Replace the door by inserting the tabs on the left side and snapping the right side into place. Do not operate cleaner without Either...

Scarica la tua

Per scaricare, digitare 2 cifre :