valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
When the indicator remains in red colour, it means that the batter y is in low level and needs to be charged. Use as a Stick vacuum: Take the stick vacuum off the charger unit and press the On/Off switch "1" (figure 13). The indicator “11” will light up, this indicator shows that the rotating brush “10” is working. Make sure that none of the nozzles are blocked and that the rotating brush is clean. Use as a hand vacuum: Take the hand vacuum off by pressing release button "6" and this will free the clips that attach it to the vacuum cleaner (figure 6). The suction nozzle on the hand vacuum can be pulled allowing the vacuum to get into awkward places, to do this pull on it gently until it is full extended (figure 14) To slide the nozzle back in, press on the release clip and push the nozzle back. (Figure 15) To pick up dry remains, vacuum in any direction until the area is clean. Do not overfill the container. Empty it out regularly. When storing or charging the hand vacuum, slot the suction nozzle back into its parking position on the stick vacuum, making sure that it is seated correctly. (Figure 5) CLEANING & MAINTENANCE Clean the container “7” and the filters “13" and “14” after each use. To do this: Take the hand vacuum off the stick vacuum and remove the dirt container by pressing the release clip and turning the container anti-clockwise. (Figure 16) Remove the cloth filter “13” and the nylon filter “14”, lifting them up as shown in figures 17 & 18. Empty the dirt container, figure 19 . Clean the container with a soft brush. If it is ver y dirty it can be washed in soapy water, make sure to rinse it well and leave it to dr y completely before refitting it. The cloth filter “13” and the nylon filter “14” can also be washed in soapy water, however make sure that they are completely dr y before refitting them. To reassemble the vacuum, place the nylon filter into position and press down on it as shown in figure 20. Fit the cloth filter “13” and press on it so that it slots in correctly, figure 21. Place the container back on the motor housing of the hand vacuum. Put the hand vacuum back on the body of the stick vacuum. The motor housing and the casings can be wiped clean with a damp cloth, do not use harsh detergents. Change the filters regularly. Spare parts can be obtained from Authorised Technical Service Centres. METHOD FOR REMOVING THE BATTERIES: To protect the environment, never put this product in with household rubbish at the end of its ......... useful life. This appliance contains Ni-MH batteries that must be taken out of the appliance for recycling. Do the following to remove the batteries: With the help of a small screwdriver, re move the battery cover on the back of the hand vacuum, figure 22. On the inside you will find that the batteries are soldered into the appliance. Pull the batter y pack out and cut the ca bles with scissors, figures 23 &24. Deposit the batteries in the special containers provided by your local authorities. Similarly, to dispose of the appliance at the end of its useful life, you can take it to an authorised technical ser vice centre. ADVICE ON DISPOSAL: Our goods come in optimised packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal ser vice as secondar y raw materials. This product complies with E...
Questo manuale è adatto anche per i modelli :Aspirapolvere - AE4413/01 (830.54 kb)
Aspirapolvere - AE4414/01 (830.54 kb)