valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
notes and cautions
Charging
f The POWERbot cannot vacuum clumps of
dirt, so some may remain on the floor after
Note
cleaning.
– Please use another cleaning tool to clean them
f If the battery overheats during charging, it
regularly.
may take longer to charge.
f If POWERbot is turned off, you cannot turn
f When automatic charging is not working, do
it on by pressing the Power button on the
the following:
remote control. Press and hold the [Start/
– Turn the emergency switch (on the bottom of
Stop] button on POWERbot.
POWERbot) off and on again.
f If the battery becomes low during Auto/
– Unplug the docking station's power plug and
Max clean mode, POWERbot will recharge
then plug it back on.
and finish cleaning the remaining area after
– Unplug the docking station, and then check
recharging. (Repeat cleaning frequency:
whether there is any foreign matter on the
charge pins and clean POWERbot and the
1 time)
charge pins of the docking station with a dry
f You cannot select and have the POWERbot
cloth or rag.
execute Max/Manual clean mode while it is
– Check for any obstacles such as reflective
charging.
objects, chairs, etc. near the docking station.
f Do not unnecessarily move the POWERbot
f If POWERbot is left detached from the
or press buttons while it is in Auto/Max clean
docking station, the battery will drain naturally.
mode. It assumes that cleaning is complete
– Try to keep POWERbot being charged on
and starts cleaning again from the beginning.
the docking station. (However, turn off the
emergency switch and leave the docking
f Do not lie down around the POWERBOT that
station unplugged when planning to leave the
is running.
house for long periods of time by going on a
– Your hair may be caught in the Pet brush or
business trip or vacation, etc.)
Side brush, resulting in physical injury.
Using
Cleaning and maintenance
Note
Note
f The POWERbot may get caught on
f If you washed the dustbin and filter with water
thresholds, etc. during cleaning.
– Dustbin: Completely wipe out the water.
– To restart operation, shut off the emergency
– Filter: Completely dry it in the shade before
switch, move the POWERbot to an area where
using.
it can move easily, and then turn on the power
again.
caution
f The POWERbot cannot completely clean
areas it cannot enter, such as corners,
f Watch your fingers when attaching or
between the wall and sofa, etc.
detaching the filter, since they may get stuck
– Please use another cleaning tool to clean them
in the dustbin's intake.
regularly.
ENGLISH-22
SR2AH905@@#AA-3ge_00716S-00_USA.indb 22
2016-05-12 오후 5:42:55
...