valutazioni - 3, GPA: 3.7
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
4 Press [MR]. • The cursor will move to the next digit. • You can move the cursor to the left or right by pressing [VFO] or [MR]. • Press [CALL] to delete the character at the current cursor position. 5 Repeat steps 3 and 4 to enter up to 6 digits. 6 Press [F] to store the name. 7 Press [MENU] or [PTT] to exit Menu mode. Note: . You cannot name the Call Channel. . You cannot assign a Memory name to a channel that does not contain data. . You can overwrite stored names by repeating steps 2 to 6. . The stored name is erased when you clear the Memory channel data. 22 MEMORY DISPLAY TYPE After storing a Memory name, the Memory name appears in place of the operating frequency. However, you can still display the operating frequency, if desired. To display the frequency rather than Memory name, access Menu No. 12 (M.DISP) and select “FREQ”. This menu toggles the display mode between the Memory name (“NAME”) and frequency display (“FREQ”). 1 Enter Menu mode and access Menu No. 12 (M.DISP), then press [F]. 2 Rotate the ENC control to set the display type to “NAME” or “FREQ”, then press [F] to store the setting. 3 Press [MENU] or [PTT] to exit Menu mode. Note: Even when set to “NAME”, the frequency will appear on the display while pressing [MONI]. CLEARING A MEMORY CHANNEL To clear the data from an individual memory channel: 1 Recall the memory channel you want to clear. 2 Turn the transceiver OFF 3 Press [MR] + Power ON. • A confirmation message appears. 4 Press [MR] to clear the channel data. • The contents of the memory channel are cleared. • To cancel, press any key other than [MR], [MONI] or [LAMP]. Note: . The Call Channel data cannot be cleared. . You can also clear the Priority Channel and the L0/U0 ~ L2/U2 channels. . While the transceiver is in Channel Display Mode or Lock function is activated, you cannot clear the channel data. 23 CALL CHANNEL The Call Channel can be recalled instantly, no matter the frequency on which you are operating the transceiver. For instance, you may use the Call Channel as an emergency channel within your group. In this case, Call Scan will be useful. The default Call Channel frequency is 144.000 MHz (TH-K20A/E)/ 430.000 MHz (TH-K40A/E). Note: Unlike memory channels 0 to 199, the Call Channel cannot be cleared. RECALLING THE CALL CHANNEL Press [CALL] to recall the Call Channel. • The Call Channel frequency and “C” appear. • To return to the previous frequency, press [CALL] again. REPROGRAMMING THE CALL CHANNEL 1 Select your desired frequency and related data (Tone, CTCSS, DCS, or offset direction, etc.). • When you program the Call Channel as an odd-split channel, select a receiving frequency first. 2 Press [F] - [CALL]. • The selected frequency and related data are stored in the Call Channel. To also store a separate transmit frequency, continue with the following steps. 3 Select the desired transmit frequency. 4 Press [F], then press [PTT] + [CALL]. • The separate transmit frequency is stored in the Call Channel. Note: . When you recall an odd-split Call Channel, “ ” and “ ” appear on the display. . Transmit offset status and Reverse status are not stored in an odd-split Call Channel. 24 MEMORY CHANNEL TRANSFER MEMORY TO VFO TRANSFER After retrieving frequencies and associated data from Memory Recall mode, you can copy the data to the VFO. This function is useful, for example, when the frequency you want to monitor is near the frequency stored in a memory channel. 1 Press [MR], then turn the ENC control to recall a desired memory channel. 2 Press [F] - [VFO] to copy the memory channel data to the VFO. Note: . When transferring an odd-split channel, the Reverse status, Offset direction, and Transmit frequency are not transferred. . You can also transfer the Program Scan memory channels (L0/U0 ~ L2/U2) and Priority channel (Pr) to the VFO. . When selecting the Call channel, rotating the ENC control will transfer the data to the VFO. CHANNEL TO CHANNEL TRANSFER You can also copy channel information from one memory channel to another. This function is useful when storing frequencies and associated data that you temporarily change in Memory Recall mode. 1 Press [MR], then turn the ENC control to recall a desired memory channel. 2 Press [F] - [MR]. 3 Select the memory channel where you would like the data copied, using the ENC control. 4 Press [MR] to copy the memory channel data to the new channel. Note: When transferring to the Program Scan memory channels (L0/U0 ~ L9/U9) and the Priority channel (Pr), the Memory Channel Lockout information is not copied. CHANNEL DISPLAY MODE While in this mode, the transceiver displays only memory channel numbers (or Memory names if they have been stored) instead of frequencies. Press [PTT] + [MR] + Power ON. • The transceiver displays the memory channel number in place of the operating frequency. To recover normal operation, turn the transceiver OFF and press [PTT] + [MR] + Power ON again. 25 Note: . To enter the Channel Display Mode, you must ha...
Questo manuale è adatto anche per i modelli :Radio - TH-K40 (996.36 kb)