valutazioni - 4, GPA: 4.5
(
)
)
|
Facilità d'uso
Up/Register Increase speaker volume. Use to enter registration mode. Down/Default Decrease speaker volume. Used to restore original settings. Play/Stop Press to play lullaby, press again to stop. Lullaby Press to select lullaby 1, 2, 3 or Play All. Battery light Red when battery is low. Lullaby lights Indicates which lullaby playing. YOUR BABY MONITOR YOUR BABY MONITOR 7 Back of Baby unit Underside Power socket For connection to mains power. Battery lock Child tamper proof lock for the battery compartment. 8 YOUR BABY MONITOR Parent unit From the Parent unit you can listen to your baby and operate the Baby unit by remote control. Talk (on side of unit) Press to talk to your baby. LED Link indicator Green On – Linked to Baby unit Green fl ashing – Not linked to Baby unit – fi rst 30 seconds Red Flashing – Not linked to Baby unit – for longer than 30 seconds. Sensitivity / Volume level LEDs During use, lights indicate: – Sensitivity level – Volume level Battery status LED – Red fl ashing when batteries are low. Lullaby Press to start playing a lullaby, press again to stop. Power on/off Press and hold to switch the power on or off. Microphone Lullaby LEDs Green on - When the selected lullably is being played. Up Increase speaker volume. Increase sensitivity when reviewing the setting. Change lullaby when playing. Mute LED Green on – When speaker is muted. Mute Press to switch the speaker off, press again to switch it back on. Sensitivity Press to review the sensitivity setting. Down/Default Decrease speaker volume. Decrease sensitivity when reviewing the setting. Change lullaby when playing. Use to restore original settings. YOUR BABY MONITOR YOUR BABY MONITOR Parent unit charger Front Back Charging light Power socket Indicates Parent unit is charging. For connection to mains power. 10 BASIC OPERATION 10 BASIC OPERATION Once you have set up your Baby Monitor, you will be able to hear the sounds in your baby’s room through the Parent Unit. And also see the green and red sensor lights around the top of the Parent Unit rise and fall with the sound levels. Note: If the connection between the Parent and Baby Units is broken at any time the green Link light on the Parent Unit will flash slowly, the parent unit will beep to alter you that the link has been lost and the green and red sensor lights will cease to react to any sounds. Move closer to the baby unit or follow the directions in "Troubleshooting" chapter to re-establish the link. Power On/Off Baby Unit • Press [ ] key to turn on the unit. • The Green Link light comes on to show within range of the Parent unit. • To switch Off, press [ ] key again. Parent Unit • Press and hold [ ] key.The Link LED on will illuminate. • Keep pressing ] key until the far right illuminate switched on and will search for and link itself to the Baby unit. • To switch off, press [ ] key until all lights turn off. Changing Baby unit from battery to mains power • To conserve battery power on the Baby unit or when the batteries are low or flat, plug the Baby unit into the mains. If currently running on batteries and switched on, changing from battery to mains power will be instant and will not affect any of the settings. • You can use the Parent unit to monitor baby while is charging. Monitoring • Position the baby unit accordingly. placed at least 1 meter away from • Take the parent unit to monitor. • Audio picked up by the depicted on the 7 lights 3 red, covering a range 40dB.). The more be lit. When no BASIC OPERATION BASIC OPERATION 11 • If the volume of the Parent Unit is turned off, an alert will sound when the audio picked up reaches the second red led. Note: Do not position the baby unit and the parent unit close to each other or in the same room as feedback may be generated. You can press [Mute] key to temporarily turn off the speaker. Press [Mute] key again to turn on the speaker. Sensitivity You can adjust the sensitivity on the Parent Unit to monitor the sound from the Baby Unit. For example, if your a particularly quiet sleeper, you can increase the levels so that you are sure to hear if baby disturbs becomes uncomfortable. There are 5 different levels. Level 5 is the most sensitive and the Baby unit is always on. At levels 1-4, the microphone noise baby makes. • Press [ ] key on the parent unit sensitivity settings (as • Press [ ] key to increase or [ ] key to decrease. There are five green lights high sensitivity. When only one green light is lit, it represents low sensitivity. Level 1 1 light on (voice activated) Level 2 2 lights on (voice activated) Level 3 3 lights on (voice activated) Level 4 4 lights on (voice activated) Level 5 5 lights on (microphone permanently on) Adjusting Volume There are 5 volume levels on each Unit and an Off setting on the Parent Unit. The LEDs indicate the level. The fi rst 4 levels are shown as green and the 5th level as red. the highest level. • Press [ ] key to increase the volume or the [ ] key to decrease the volume on both unit. Mute...