Before first use Transmitter This appliance requires a certain electric power; it must be plugged into the mains with its adaptor. -Place the jack on the transmitter and plug the adaptor in to the mains -fig. A. The transmitter should be set up in an elevated spot, standing upright, at a distance of at least 1 metre and no more than 3 metres from the child. You can also insert three 1.5-volt AAA LR03 alkaline batteries in the battery compartment if you want to use it cordless. Caution: in this c

It is a useful feature that ensures your Baby Monitor is returned to its new “out of the box” settings. SC310 user manualindd 23 vy 2011-10-25 15:09:21 z 24 USING YOUR DIGITAL BABY MONITOR Reset the Parent unit 1. Within 3 seconds of the Parent unit being switched on, press and hold the © button for at least 10 seconds. The display will show Reset for 2 seconds during the reset and then you will hear a confirmation beep once the reset has been performed. Reset the Baby unit 1. Within 3 s

No user-serviceable parts inside. Risk of electrical shock, fire or death. 5 • Remove battery from Parent’s Unit if it will not be used for a long time. • Remove a dead battery promptly. A dead battery left in unit may leak, damaging your unit. • Do not attempt to recharge a non-rechargeable battery. • A rechargeable battery CANNOT be recharged by plugging AC adapter into the Parent’s Unit. Remove the battery from unit to recharge it. • Charging of a rechargeable battery should only be done by a

The Parent Unit will operate if the rechargeable battery is charged. Selecting Channels • In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the “ch” button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6 times until a good channel is found. 3 Low B

148TR SU 2 B. Parent unit A. Baby unit B. Parent unit A. Baby unit EN Legend of functions A. Baby unit A-1 On/Off button A-2 DC 9V — ——< <<+ ++ power supply jack A-3 AC power adapter A-4 Power plug A-5 Microphone A-6 POWER light A-7 Microphone sensitivity switch A-8 Channel selection switch A-9 Battery compartment cover B. Parent Unit B-1 Loudspeaker B-2 LINK light B-3 AC power adapter B-4 Power plug B-5 DC 9V — ——< <<+ ++ power supply jack B-6 LINK alarm switch B-7 Channel selection switch B-8

What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCL

Ultraclear™ Moniteur Manuel d’utilisateur Veuiller garder pour usage ulterieur. Monitor Ultraclear™ Manual del propietario Por favor, conservelo para utilizarlo en el futuro. 2755 Dear Customer, Graco is the recognized leader in the design and manufacture of quality baby products. We believe your new Graco nursery monitor is a wise choice. Before using your nursery monitor, please take a few minutes to read this Owner’s Manual. The short time you spend reading these instructions will help you us

1). Figure 1 fig. 1 Sensor Pad Sensor Pad CORRECT INCORRECT PLACEMENT OF SENSOR PAD CORD CORRECT Sensor Pad Centered Turquoise Side Up INCORRECT Sensor Pad Off Center INCORRECT Sensor Pad Turquoise Side Down POSITION OF SENSOR PAD UNDER MATTRESS (Top Down View of Crib) fig. 2 IMPORTANT: Only use the AC adapters included with your monitor. Do not use these adapters with any other equipment. Movement Sensitivity Control. The movement sensitivity control is on the back of the Nursery Unit. The leve

Any ............................................................................ .......................................................................................... .......................................... ........................................................................................ check that: ....................................................................V .............................................................................................. ...................