valutazioni - 5, GPA: 3.8
(
)
)
|
Facilità d'uso
Special features of the CR-113iPH enable it to share information with a docked iPod touch or iPhone (requires installation of a free Technika application on the iPhone). UNPACKING Carefully unpack the unit. If it is damaged, please return it to your nearest Tesco store for replacement. Remember to take your purchase receipt with you. Retain the User Handbook. If you pass the unit on to a third party make sure you pass on the handbook. We suggest you retain the packaging. If you dispose of it, do so having regard to any recycling regulations in your area. CONTENTS The carton should contain: The CR-113iPH clock radio• AC adaptor• Operating Manual• If any items are missing or damaged, contact your nearest TESCO store for a replacement. Have your receipt ready when you call. Retain the packaging. If you dispose of it, do so having regard to any recycling regulations in your area. LOCATION Place the unit on dry stable surface away from heat and damp and where it is unlikely to fall or be knocked over. If you plan to dock an iPod or iPhone to the unit, ensure that there is enough clearance for the retractable dock to open from the left side of the unit. 2 3 CONTROLS & CONNECTIONS FRONT VIEW a Display b Preset button c Display/Memory button d Play/Pause/Enter button e Next/Set + button f Previous/Set - button g Alarm button h Time button i Sleep button 1) Retractable iPod dock CONTROLS & CONNECTIONS BACK VIEW TOP VIEW a Volume down (-) and up (+) buttons b Standby/On/Alarm reset button c Snooze/Display dimmer button d Input function selector button e Retractable iPod dock a 12/24 hour selector button b Audio In jack c FM aerial wire d DC In jack DISPLAY DISPLAY DIMMER The display brightness can be set to one of 3 levels. Press the • SNOOZE/DIMMER button repeatedly to set the display brightness to one of the options of high, medium or off. DISPLAY LAYOUT a Time display b FM stereo indicator c MHz indicator for FM d Date/Alarm minutes time display e Sleep indicator f Temperature display* g Month/Alarm hours display h Weather display* i AM/PM indicator for alarm 1) AUX (Audio In) mode indicator 1! FM mode indicator 1@ iPod/iPhone mode indicator 1# Alarm 2 indicator 1$ Alarm 1 indicator 1% AM/PM Indicator for clock (12 hour mode) *Features require a docked iPhone or iPod touch with Technika application installed. BACKUP BATTERY A backup battery may be fitted to your clock radio. With the backup battery fitted, your clock radio will retain your time and alarm settings in the event of a power cut. The backup battery compartment is located on the underside of the unit. To fit a backup battery: Referring to the drawing, use a coin or flat-bladed 1. screwdriver to turn the battery cover anti-clockwise to the ‘unlocked’ symbol. Lift out the battery cover.2. Fit a CR2032 battery, observing polarity as shown 3. below. Replace the battery cover with the slot aligned to the 4. unlock symbol. Turn the cover to align the slot with the lock symbol to 5. lock it in place. Battery disposal: Dispose of used batteries with regard to the recycling regulations in your area. Do NOT short circuit batteries or throw them into water, the general rubbish or in a fire. Weak batteries can leak and damage the unit. Replace them in good time! GETTING STARTED TIME AND DATE DISPLAYS FM AERIAL Before using your clock radio for FM reception, unwrap and fully extend the aerial wire. You may need to adjust the position of the aerial wire for maximum signal strength. CONNECTING AC MAINS POWER Before connecting the power, check that the mains voltage on the rating plate of the AC adaptor is the same as the voltage in your area. Plug the DC cord from the AC adaptor into the DC jack on • the back of the unit. Plug the AC adaptor into the wall socket and switch the • mains power on. The unit is now ready for use. NOTE:- The AC adaptor may become warm during operation - this is normal. SETTING THE TIME AND DATE When first switched on, the clock and date displays on your radio will not be set. Choosing 12 or 24 hour clock time display: At any time you can press the • 12/24 hr. button on the back panel to switch the clock display between 12 or 24 hour time display. The clock and alarm displays will toggle between 12 hour (with AM and PM indicator) and 24 hour modes. NOTE: changing between 12 and 24 hour display will not affect the clock or alarm settings. To set the clock time: Press the • TIME button briefly. The hours digit will flash. Press the• }/SET+ or {/SET- button to set the correct hour. Press the • /,/ENTER button to confirm this setting. The minutes digits will flash. Press the• }/SET+ or {/SET- button to set the correct minutes. Press the • /,/ENTER button to confirm this setting. The clock is now set. To set the date: Press and • hold the TIME button. The year digits will flash. Press the• }/SET+ or {/SET- button to set the correct year. Press the • /,/ENTER button to confirm this setting. The month (left) digits will flash. Press the• }/SET+ or ...