valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
2. Press and hold the [a] or [d] button. English DSH920S 7 Sirius operation English The receiver moves to seek channels below or above the current channel. If the channel found when either button is released is available that channel is received. Otherwise, seeking continues until an available channel is found. l Manual tuning Any channel including channels without broadcasts and channels not covered by the contract can be selected during manual tuning. 1. Press and hold the [BAND ] (BND) button for 1 second or longer. * This changes the seek mode to manual mode and the “MANU ” indicator on the display lights. When this operation is performed in manual mode, the seek mode is engaged and the “MANU ” indicator on the display goes off. Notes: • The receiver automatically reverts to the seek mode when the [a] or [d] button is not used for 7 seconds in the manual mode. 2. Press the [a] or [d] button. The receiver moves to channels above or below the current channel one by one. 3. Press and hold the [a] or [d] for 1 second or longer. The receiver moves to seek channels below or above the current channel and the channel found when either button is released is received. Recalling a preset station A total of 18 SIRIUS stations can be stored (6SR1, 6-SR2 and 6-SR2). This allows you to select your favorite SIRIUS stations and store them in memory for later recall. 1. Press the [BND ] button and select the desired SIRIUS band (SR1, SR2 or SR3). 2. To recall a stored SIRIUS station, press the desired [DIRECT ] button to select that station. * Press and hold one of the [DIRECT ] buttons for 2 seconds or longer to store the current station into preset memory. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of [DIRECT ] buttons for 2 seconds or longer to store the current station into preset memory. 8 DSH920S Notes: • When the name of a channel stored in memory is changed by a broadcasting station, the display may show a channel name that differs from the stored name. • A channel stored in memory may be discontinued at the option of the broadcasting station. Category selection function SIRIUS Radio allows you to select broadcast channel category (contents). Receiving stations selected by category 1. Press the [RDM ] (RD) button to enter the category selection mode. 2. Turn the [ROTARY ] knob clockwise or counterclockwise to select a category. Or, press a [DIRECT ] button if the category is preset. 3. Press [a] or [d] button to tune in a station. This starts seek tuning and broadcast channels that meet the specified category are selected. The “CA ” indicator is displayed in the function mode indication during seek tuning. The CAT indicator lights on models without a function mode indication. 4. Press the [RDM ] (RD) button again to cancel. Notes: • When the category selection mode is entered, the category of the last received channel is displayed first. • The category selection mode is canceled when no channel with the selected category can be found. • Press the [a] or [d] button within 7 seconds after a channel has been set to continue seeking channels up or down.The category selection mode is canceled and normal reception is resumed if no operation is performed for 7 seconds. Presetting a category A category can be preset by registering specific categories in [DIRECT ] buttons 1 to 6. Then the desired category can be recalled by pressing the corresponding [DIRECT ] button. 1. Press the [RDM ] (RD) button to enter the category mode. 2. Turn the [ROTARY ] knob clockwise or counterclockwise to select a category. 3. Press and hold one [DIRECT ] button for 2 seconds or longer to store the current category in the preset memory. Notes: • When the name of a channel stored in memory is changed by a broadcasting station, the display may show a channel name that differs from the stored name. • A channel stored in memory may be discontinued at the option of the broadcasting station. Scan function There are two scan modes: a category scan mode and a preset scan mode. During scanning channels are displayed in abbreviated form and the display mode cannot be switched. l Category scanning In a category scan, broadcast channels in the same category as the current channel are selected about every 10 seconds. 1. Press the [SCN] (SC) button to start a category scan. 2. Press the [SCN] (SC) button, a [DIRECT] button, the [a] or [d] button to cancel a category scan. Note: • Category scanning is not available when no category is defined for the current channel. l Preset scan A preset scan scans the channels (up to 18 channels) stored in the preset memory about every 10 seconds. 1. Press and hold the [SCN] (SC) button for 1 second or longer to start a preset scan. 2. Press the [SCN] (SC) button, a [DIRECT] button, the [a] or [d] button to cancel a preset scan. Sirius operation DSH920S 9 English English 5. INSTALLATION AND WIRE CONNECTION Before Installation 1. Before starting, be...