valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
11. Only use attachments/accessories specified by the manufacturer. 1 9 0 @ # ! 2 3 5 67 4 8 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and – as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. 16. Apparatus shall not be exposed to dripping or splashing. 17. Do not place any sources of danger on the apparatus (i.e. liquid filled objects, lighted candles). 18. This product may contain lead and mercury. Disposal of these material may be regulated due to enviromental considerations. For disposal or recycling information, please contact your local authories or the Electronic Industries Alliance : EL 6475-E005: 04/01 $ %^ &*( English CONTROLS Top View (see fig. 1) 1 SET TIME /ALARM OFF -sets the clock time -stops the active alarm for 24 hours -switches off the radio sleep function 2 SET ALARM 1 / SET ALARM 2 - sets the alarm time for alarm 1 / alarm 2 3 AL1/ AL2 /AL1+2 - selects which alarm(s) you want to set alarm time on 4 REPEAT ALARM - switches off the active alarm for a 7-8 minutes period 5 OFF/ ON/ AUTO/ BUZZ OFF: switches off the radio/alarm ON: switches on the radio AUTO: activates the radio for alarm BUZZ: activates the buzzer for alarm 6 TIME SET 3 - to adjust time fast forward 7 TIME SET 4 - to adjust time back 8 SLEEP -activates the radio for sleep function -adjusts the sleep period Front View (see fig. 2) 9 ALARM 1 indicator - lights up when alarm 1 is activated. 0 ALARM 2 indicator - lights up when alarm 2 is activated. ! DISPLAY - shows the clock/alarm time and status of the setting @ Frequency pointer - shows the radio frequency of your selected waveband # PM indicator -lights up when time is PM. CLOCK MEMORY BACKUP The clock memory backup allows your alarm and clock time settings to be stored for up to a day when there is a power interruption e.g. power failure. The complete clock radio and display illumination will be switched off. As soon as the power supply returns, the display will indicate the correct time. 1 Remove the battery door to insert a 9 volts 6F22 type battery (not included) for backup. 2 Replace the battery door. NOTE: If no backup battery is installed or the power interruption is prolonged, you will need to set the clock and alarm times again. Batteries contain chemical substances so they should be disposed of properly. Standby power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2W RADIO You can use this set solely as a radio! 1 Adjust OFF/ ON/ AUTO/ BUZZ to ON to switch on the radio. 2 Select your waveband by adjusting the FM/AM switch. 3 Adjust TUNING to tune to your desired station. 4 Turn the VOLUME control to adjust the volume level. 5 Adjust OFF/ ON/ AUTO/ BUZZ to OFF to switch off the radio. To improve reception: FM: use the antenna built in the power cord. Adjust the position of the power cord for optimum reception. AM: uses a built-in antenna inside the set. Direct the antenna by adjusting the position of your set. Back View (see fig. 3) $ Battery door - opens to store a 9 volts 6F22 battery (not included) for clock memory backup. % TUNING - tunes to radio stations ^ FM/AM -selects FM/AM waveband & BRIGHTNESS (High or Low) -selects display brightness * Power cord - for power supply and to improve FM reception ( VOLUME - adjusts the sound level INSTALLATION POWER SUPPLY 1 Check if the power supply, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service center. 2 Connect the power cord to the wall outlet. 3 To disconnect the set from the power supply completely, remove the plug from the wall outlet. SELECTING DISPLAY BRIGHTNESS This set allows you to choose high or low brightness of display. • Adjust BRIGHTNESS switch (located on the rear of the set) to HIGH or LOW position. SETTING THE CLOCK TIME The time is displayed using the 12-hour clock with PM indicator (PM off = AM). 1 Hold down SET TIME/ALARM OFF. 2 Press TIME SET 3 or 4 repeatedly, or hold down TIME SET 3 or 4 to adjust minute and/or hour. -TIME SET 3 : to adjust time fast forward -TIME SET 4 : to adjsut...