valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
4. Make sure the PM lamp is off if you want the clock to wake you in the morning. 5. Release the ALARM/OFF button, the clock display will show the normal time of day. NOTE: Again check the PM indicator. If you want the radio to wake you in the morning, the PM lamp should be off on alarm time (when pressing ALARM/OFF button). To change PM to AM time, advance time 12 hours. To have clock wake you up, slide the FUNCTION switch to AUTO or ALARM position(s). Playing the Radio 1. Slide the FUNCTION switch to ON position. 2. Slide the BAND switch to either AM or FM. 3. Turn the TUNING control to your desired station. 4. Adjust the VOLUME control to your favorite listening level. 5. Slide the FUNCTION switch to OFF position to shut off the radio. GETTING BETTER RADIO RECEPTION: For best AM reception, rotate the radio a small amount or position it near the window. For best FM reception, unwrap and fully extend the FM antenna wire. WARNING: Do not connect the FM antenna to an outdoor antenna. IB-CR501-DG-E-052405 3 IB-CR501-DG-E-052405.pmd 4 5/24/2005, 4:34 PM Waking up to Radio (Alarm) 1. Set the alarm time as previously instructed. 2. Select your desired AM or FM broadcast by following the procedure of Playing the Radio. 3. Make sure the VOLUME control is set loud enough to wake you up. 4. Slide the FUNCTION switch to AUTO position and the AUTO lamp will light up. NOTE: Your set is now ready to turn on automatically at your selected alarm time. 5. When alarm sounds, to get 9 minutes of extra sleep, press the SNOOZE button. 6. To shut off the alarm, press ALARM/OFF button. Wake to Buzzer (Alarm) 1. Set the alarm time as previously instructed. 2. Slide the FUNCTION switch to ALARM position. The AUTO indicator will light. 3. The buzzer alarm is now set to turn on automatically at the selected alarm time. 4. When buzzer sounds, to get 9 minutes of extra sleep, press the SNOOZE button. 5. To shut off the alarm, press ALARM/OFF button. Snooze Control When this set has waken you up and you wish to sleep a few minutes more, simply press the SNOOZE button. The radio or alarm will go off for 9 minutes and then come on again. This is repeated in a row. Alarm Off 1. Press ALARM/OFF button. This will shut the alarm for that day only. Next day the set will wake you again at the same time. 2. Slide the FUNCTION switch to OFF position and the alarm function is off until you re-adjust the FUNCTION switch to AUTO or ALARM. Sleep Control The SLEEP control will allow the radio to play 59 minutes (or 1 hour and 59 minutes) before the radio turns itself off. 1. Press the SLEEP button, the display will show 59 minutes and the radio will start to play. 2. Holding the SLEEP and MINUTE SET buttons down, the display will count down. Release the buttons when the display shows your desired amount of time you want the radio to play before shutting itself off. 3. Pressing the SLEEP button, the HOUR set button, and the MINUTE set button all simultaneously down, the required sleep time will be changed to 1 hour and 59 minutes. You may reduce the sleep time by following the above Step 2. 4. To turn the radio off before the playing time has expired, simply press the SNOOZE button. NOTE: The sleep function will not affect the wake-up operation of the clock if the FUNCTION switch is in AUTO or ALARM position. In the morning, the radio or buzzer will wake you up if FUNCTION switch is in the AUTO or ALARM position. 4 IB-CR501-DG-E-052405 IB-CR501-DG-E-052405.pmd 5 5/24/2005, 4:34 PM (Helpful Hints) SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE FOLLOWING BEFORE SEEKING SERVICE. FM is distorted and weak. Noise or weak sound on AM broadcasts. No sound. The clock is flashing. Clock is dead. FM antenna wire is not extended. Station not tuned in properly. Weak broadcast station. Signal is blocked. External interference. FUNCTION switch is in the OFF position. VOLUME control set to minimum position. The clock is not set. A power failure has occurred. The set’s AC cord is not connected. Extend FM antenna wire. Tune to desired station carefully. Turn to a stronger station. Rotate the set to receive better signal. Turn the radio for better AM reception or bring the set near a window. Slide the FUNCTION switch to ON position. Rotate VOLUME control for desired sound. Set the clock and alarm time. Reset the clock alarm time and time of the day. Connect the set’s AC cord and make sure outlet has power. LENOXX reserves the right to make design and specification changes for product improvement. SYMPTOM CAUSE SOLUTION Alarm does not come on in the morning. AM or PM not set correctly. Is alarm time set in AM range (PM Lamp off)? Advance the clock 12 hours. FUNCTION switch is in OFF position. Is the AUTO Lamp off? Set the FUNCTION switch to AUTO or ALARM position. PROTECT YOUR FINE FURNITURE! WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH. 5 IB-CR501-DG-E-052405 IB-CR501-DG-E-052405.pmd ...