valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install battery Caution • Risk of explosion! Keep bat teries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of product damage! When the apparatus is not used for long periods, remove the batter y. • Batteries contain chemical substances, so they should be disposed of properly. 1 Open the batter y compar tment. 2 Inser t 4 x 1. 5 V R14/UM2 /C batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Tip • When the main unit is powered by bat teries, the backlight turns on for 5 seconds after any operation. Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. • Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. • Before you connect the AC power cord, ensure that you have completed all other connections. 1 Connect the supplied AC power cord to: • the AC MAINS jack on the main unit. • the wall outlet. Tip • When the main unit is powered by AC mains supply, the backlight always turns on. Set time 1 Press to turn off the radio. 2 Press and hold PROG/AUTO SCAN. » The hour digits begin to blink. 3 Rotate TUNING to set the hour. 4 Press PROG/AUTO SCAN to confirm. » The minute digits begin to blink. 5 Rotate TUNING to set the minute. 6 Press PROG/AUTO SCAN to confirm. Turn on 1 Press to turn on the radio. Listen to radio Select FM/MW band 1 Press to turn on the radio. 2 Press BAND to switch between FM/MW band. Tune to a radio station 1 Press to turn on the radio. » [FM] or [MW] is displayed. 2 Rotate TUNING clockwise or counter-clockwise to tune to a radio station. To skip to previous/next radio station with strongest signal automatically: 1 Press PROG/AUTO SCAN. » The radio frequency begins to blink. 2 Rotate TUNING clockwise/counter-clock wise to skip to the nex t /previous radio station with strongest signal. Program radio stations automatically Note • You can program a maximum of 10 preset FM radio stations and 10 preset MW radio stations. 1 Press to turn on the radio. 2 Press and hold PROG/AUTO SCAN for 2 seconds. » All available stations are programmed in the order of waveband reception strength. » The first programed radio station broadcasts automatically. Program radio stations manually Note • You can program a maximum of 10 preset FM radio stations and 10 MW radio stations. 1 Press to turn on the radio. 2 Tune to a radio station. 3 Press PROG/AUTO SCAN. » The radio frequency begins to blink. 4 Press 1 - 10 to select a number. » The selected number begins to blink. 5 Press PROG/AUTO SCAN to confirm. 6 Repeat steps 2 - 5 to program more stations. To store the previous/next radio station with strongest signal 1 Press to turn on the radio. 2 Press PROG/AUTO SCAN. » The radio frequency begins to blink. 3 Rotate TUNING clockwise/counterclock wise to skip to the nex t /previous radio station with strongest signal. 4 Press 1 - 10 to select a number. » The selected number begins to blink. Press PROG/AUTO SCAN to confirm. Tip • To over write a programmed station, program another station in its place. Select a preset radio station 1 Press to turn on the radio. 2 Press 1 - 10 to select a preset radio station. 5 Product information Note • Product information is subject to change without prior notice. Tuner Tuning range FM: 87. 5 - 108 MHz MW: 531 - 1602 kHz Tuning grid 50 KHz (FM); 9 KHz (MW ) Number of presets FM: 10 MW: 10 General Power supply AC: 220 - 240V~, 50/60Hz DC: 4 x C bat teries Maximum power output 1 W Operation Power Consumption 5 W Dimensions - Main Unit (H x W x D) 210 x 137 x 79 mm Weight -With Packing1.2kg - Main Unit 0.8 kg Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips web site (When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Ensure that the Mains cord is connected securely. • Ensure that there is power at the AC Mains. • Ensure that the bat teries are inser ted correctly. Timer does not work • Set the clock correctly. • Switch on the timer. No sound • Adjust the volume. Clock/timer setting erased • Power has been interrupted or the power cord has been disconnected. • Reset the clock /timer. No response from the unit • Take out the batteries and turn on the unit again. • Disconnect and reconnect the AC power plug, then turn on the unit again. © 2010 K...