valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
190 mm . 67 mm . 62 mm (w/h/d) (7 1/2 inches . 2 3/4 inches . 2 1/2 inches) not including projecting parts and controls Mass Approx. 620 g (1 lb 5.87 oz) including power supply unit and CR2032 battery Supplied accessories AM loop antenna (1) Design and specifications are subject to change without notice. 4-180-721-11(1) About the backup battery To maintain accurate time, this unit includes an internal CR2032 battery as a backup power source in the event of a power interruption. Knowing when to replace the battery When the battery becomes weak, “.” will appear in the display. If a power interruption occurs while the battery is weak, the current time and alarm will be initialized. Replace the battery with a Sony CR2032 lithium battery. Use of another battery may cause a fire or explosion. Note If “AM 12:00” flashes in the display when the unit is connected to an AC outlet for the first time, the battery may be weak. In this case, consult your Sony dealer. Installing and replacing the backup battery 1 Keep the AC plug connected to the AC outlet, remove the screw that secures the battery compartment at the bottom of the unit using a screwdriver, and pull the battery compartment marked PULL OPEN. (See fig. .-.) 2 Insert a new battery in the battery holder with the . side facing up. To remove the battery from the battery compartment, push it out from the side marked PUSH. (See fig. .-.) 3 Insert the battery compartment back into the unit and secure it with the screw. (See fig. .-.) 4 When you are replacing the battery, press any of the following buttons: RADIO BAND, AUDIO IN, or NATURE SOUND / PRESET to turn “.” off in the display. Note When you replace the battery, do not disconnect the AC plug from AC outlet. Otherwise, the 100 year calendar, current time, alarm and station presets will be initialized. . . . . CR2032 Connecting the antenna To connect the AM loop antenna The shape and the length of the antenna is designed to receive AM signals. Do not dismantle or roll up the antenna. 1 Remove only the loop part from the plastic stand. 2 Set up the AM loop antenna. 3 Connect the cords to the AM antenna terminals. Cord (A) or cord (B) can be connected either way round. A B Only insert up to here. Insert the cord while pushing down the terminal clamp. 4 Make sure the AM loop antenna is connected firmly by pulling softly. Adjusting the AM loop antenna Find a place and an orientation that provides good reception. . Do not place the AM loop antenna near the unit or other AV equipment, as noise may result. Tip Adjust the direction of the AM loop antenna for best AM broadcast sound. ©2010 Sony Corporation Printed in China FM/AM Clock Radio ICF-C707 Operating Instructions Dream Machine is a trademark of Sony Corporation. No Power No Problem is a trademark of Sony Corporation. This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product. Setting the clock for the first time This unit is preset to current EST (Eastern Standard Time) at the factory, and is powered by a backup battery. All you need to do the first time is just plug it in and select your time zone. 1 Plug in the unit. “year” (about 4 seconds) . “month and date” (about 4 seconds) . “current EST (Eastern Standard Time)” appears in the display in turn. 2 Press and hold DATE/TIME ZONE for at least 2 seconds. Area number “2” flashes in the display. 3 Press TIME SET + or – repeatedly to select the time zone as follows: Area number Time zone 1 Atlantic standard Time 2 (default setting) Eastern standard Time 3 Central standard Time 4 Mountain standard Time 5 Pacific standard Time 6 Yukon standard Time 7 Hawaiian standard Time 4 Press DATE/TIME ZONE to set. Notes . Though the clock is correctly set at the factory, discrepancies may arise during transport or storage. If necessary, set the clock to the correct time by referring to “Setting the clock.” . While setting the time zone, you must perform each step within 65 seconds, or the time zone setting mode will be cancelled. When daylight saving time (summer time) begins This model automatically adjusts for daylight saving time (summer time). “ ” is displayed from the beginning of daylight saving time (summer time), and disappears at the end of daylight saving time (summer time) automatically. . Daylight saving time (summer time) begins at: 2:00 AM on the second Sunday of March. . Standard time begins at: 2:00 AM on the first Sunday of November. To cancel Automatic DST/Summer Time adjustment during the daylight saving time (summer time) period Automatic DST/Summer Time adjustment can be canceled. Press and hold DISPLAY/CLOCK and SNOOZE / BRIGHTNESS at the same time for at least 2 seconds while the clock is displayed. “ ” and “OFF” appear in the display to show that Automatic DST/Summer Time adjustment has been canceled. The display returns to the clock. Notes . Time...