. Use a plastic scraper but be careful not to damage the inner surfaces of the freezer. . Wipe up the scraped frost and ice before it is completely defrosted. • Using Your Ice Cube Trays . Recommended thermostat setting for ice making is position 5. . Fill the ice cube tray (two thirds of it) with cold water or with any liquid suitable for freezing and place the tray on the bottom of the freezer to freeze properly. . Dry the tray, otherwise it may stick to the bottom of the freezer. . The best m

inch thick. There is no need to defrost the refrigerator, because ice depositing on the inner back wall is defrosted automatically. Ice is depositing on the inner back wall during the compressor operation; later on, when the compressor is not operating ice is defrosting and water drops collect and drain through the outlet in the inner back wall into the drain pan situated above the compressor, from where it evaporates. . How? CAUTION Do not use boiling water because it may damage the plastic par

Before you call for service, check the Troubleshooting Guide. It*fets causes of minor operating problems that you can correct yourself. IF YOU NEED SERVICE We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further help. FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem. NEXT, if you are still not pleased, wr