valutazioni - , GPA: ( )

Istruzioni per l'uso Bell Sports, Modello CP4400

Produttore : Bell Sports
File Size : 107.4 kb
File Nome : CP4400_manual.pdf

Lingua di insegnamento:

Il documento viene caricato, si prega di attendere

Scarica la tua primo

Il documento viene caricato, si prega di attendere

Scarica la tua primo

The screen will display 1. SET DATE 2 Press the VOL+ button twice. The screen will display 3 LCD BRIGHT. 3 Press the MUTE button. The screen will display BRIGHT and a series of “1” representing the display contrast. 4 Use VOL+ and VOL- to adjust the display contrast. 5 Press the MUTE button. The screen will display 3 LCD BRIGHT. 6 Wait a few seconds and the screen will go to idle and display the date and time Set the Interface 1 With the phone on hook, press the MUTE button. The screen will display 1. SET DATE 2 Press the VOL+ button three times. The screen will display 4 INTERFACE. 3 Press the MUTE button. The screen will display USB PSTN. Insure that PSTN is blinking. 4 Press the MUTE button. The screen will display 4 INTERFACE. 5 Wait a few seconds and the screen will go to idle and display the date and time. 9 TELEPHONE FEATURES To Place A Call Press the On/Off button and you will hear a dial tone. The On/Off LED will light. Dial the telephone number using the keypad. To End A Call Press the On/Off button. The On/Off LED will no longer be lighted. To AnswerA Call When the Conference Telephone rings, press the On/Off button to answer the call, and the LED indicator will light up to signal the unit is ON. To Adjust Volume To adjust volume level, use the VOL+ and VOL- keys until the desired level is reached. Twelve volume steps are available. When the maximum or minimum volume is reached, the Volume Status LED will turn red. To Mute A Conversation To turn off the microphones during a conversation, press the MUTE button. The LED indicator will flash to signal that the user cannot be heard at the other end of the line. To turn on the microphones, press the MUTE button again. To Place a Call on Hold To place a call on Hold, press the HOLD button during a conversation. The Hold LED indicator will flash and both the microphones and speaker will be muted so that neither party can be heard by the other. To remove a call from Hold, press the HOLD button again. Please note that the ON/OFF button cannot be used to retrieve a call from hold. To Use Redial With the conference phone is off-hook, press the REDIAL button to call the last number dialed. To Use Flash Pressing the FLASH button will generate a timed hookswitch signal. The standard value for this time is 600 milliseconds. See the instructions on Page 4 for setting the Flash time. Flash may be used to switch between calls if the user subscribes to Call Waiting services from the local telephone company. It may also be used for three-way calling. Again a subscription to this service is required. Instructions for these features should be obtained from the telephone company. 10 Memory Dial The CP4400 provides 20 memory dial locations. Each location can store up to 31 digits. Storing a Memory Dial Number With the phone on-hook, follow the steps below to store a memory dial number. 1 Press STORE. The Memory LED will blink. The screen will display GROUP (01-20). 2 Dial a 2 digit storage location. This number must be between 01 and 20. 3. If the location is empty, skip to st...