18 5 Paging and Intercom Use (for multi cordless handset systems) You can locate cordless handsets from the corded base or from other cordless handsets, and you can make intercom calls between cordless handsets, or transfer calls between cordless handsets, or set up a conference call between two cordless handsets and an external caller, provided you have more than one cordless handset registered to your base. Note: You cannot make or receive intercom calls, transfers or conference calls with the corded base. 5.1 Find the Handset You can locate the handset by pressing the button on the front of the base station. All the handsets registered to the base will produce the paging tone and show "PAGING" on the display for 60 seconds. You can stop the paging by pressing // on any handset or on the base again. Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging. 5.2 Make an Internal Call This feature allows you to make internal calls, transfer external calls and make conference calls. If the called handset is not answered within 60 seconds, It will stop ringing and the calling one will return to standby mode. 5.2.1 Intercom 1. In idle mode, press (INT) and all the other registered handset numbers will display, along with a "9". 2. Enter the number of the handset you want to call, or enter <9> to call all the handsets. 3. The called handset rings. Press on the called handset to establish the internal call. Note: If only one other cordless handset is registered to the base station, pressing (INT) will call that cordless handset immediately. 19 5.2.2 Call All Handsets 1. In idle mode, press (INT) and all the other registered handset numbers will display, along with a "9". 2. Press <9> to ring to all registered handsets. 5.2.3 Transfer an External Call During an external call: 1. Press
)
