valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
These display prompts are shown below. Handset display The Caller List is empty or there are no stored items in the directory. No items stored Recharge 12 new calls (III] 12 new calls ?A ►=Directory ^Ringer offvv fill] ROBINSON,TINA 1-000-222-3333 The battery needs to be charged. Place the handset on the base unit to charge the battery (P- 14). The display shows the number of new calls and the battery strength while the handset is on the base unit. This display shows the number of new calls when ® or ® is pressed while the handset is off the base unit. To search from the most recent call, press ®. To search from the oldest call, press ® (p. 34). To go to the directory list, press FWD/EDIT ® (Directory key). When the handset ringer volume is set to OFF (P- 20), “Ringer off” will flash for about 45 seconds before the handset returns to the standby mode (p. 14). When a call is received, the display shows the caller’s name and number after the first ring. Talk 01-06-35 (III] During a conversation, the display shows the length of the call (ex. 1 hour, 6 minutes and 35 seconds). The battery strength is also displayed (p. 13). 8 No link to base Place on cradle and try again. The handset has lost communication with the base unit. Place the handset on the base unit and try again. SMITH,JACK 1-222-333-4444 11 : 2 OA JAN10 X3 Ann 1234567890 This is a name from the Caller List. The display shows: — the caller’s name, — the caller’s number, — the time and date of the last call (ex. Jan. 10, 11:20 AM), and — the number of times called (ex. 3 times). This is a name from the directory. The stored name and phone number are displayed. Paging Press INTERCOM The base unit is paging the handset (p. 50). Intercom 00-00-07 (BBS] The handset and the base unit are in the intercom mode (p. 50). Intercom hold 00-01-12 [ BBB ] An outside call has been put on hold by the handset user in the intercom mode. To release the hold, press (TALK). BROWN,NANCY 1-000-222-3333 ----Waiting---- A second call is received during a conversation (p. 51). For assistance, please call: 1 -800-211 -PANA(7262) 9 Please lift up and try again. Not available Directory full Save error Answering system setting. See base unit. Remote operation (III] ®, ®, back @ or FWD/EDIT ® was pressed while the handset was on the base unit. Lift the handset and press the button again. While the base unit was not in the standby mode, (▼) or (X) was pressed to search the Caller List/directory list, FWD/EDIT © was pressed to select an option or 1INTERCOM/CLEARI was pressed. When trying to store an item or Caller List information in the directory, the directory memory is full (p. 38, 43). While storing items in the directory, the handset has lost communication with the base unit. Move closer to the base unit and try again. The unit is in answering system programming mode (p. 24). The handset is operating the answering system remotely (p. 64). 10 Base unit display The clock needs adjusting (p. 25). Your greeting message was not recorded correctly. Record it again (p. 22). The unit is in the answering system programming mode. The speaker volume level is set to “5”. You can select 9 levels (0-8) while using the answering system (p. 22, 54) or the intercom (p. 50). 12 messages have been recorded. Memory is full. Erase some or all of the messages (p. 57). The recording time is set to “Greeting only” {p. 27). (The display is blank.) For assistance, please call: 1-800-211-PANA(7262) Settings Connections Single-Line Telephone Jack (RJ11C) •USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z). •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •To connect a standard telephone on the same line, see page 69. •If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services. 12 Battery Charge Place the handset on the base unit and charge for about 6 hours before initial use. •The IN USE/CHARGE indicator lights and a beep sounds. Battery strength You can check the battery strength on the handset display while the handset is on the base unit, while it is in use (making/answering a call etc.), or after viewing the Caller List or directory items, programming etc. The battery strength will remain for a few seconds after using the handset, then the display will return to the standby mode (p. 14). The battery strength is as shown in the chart below. Display prompt Battery strength { D DD ] Fully charged { SB] Medium { □] Low *( Bit (flashing) Needs to be recharged. For assistance, please call: 1-800-211-PANA(7262) ^ Settings Recharge Recharge the battery when: —“Recharge” is displayed on the handset, —“ ( I ] ” flashes on the display, or —the handset beeps intermittently while it is in use. •If you DO NOT recharge the handset battery for more than 15 minutes, the display will keep indicating ...