|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
3 {Save} i {OFF} Note: LWhile message alert is on, battery operating time is shortened (page 11). For assistance, please visit Multi-unit Operation Intercom Intercom calls can be made: – between handsets – between the handset and base unit (KX-TG3031/KX-TG3032/KXTG3033/ KX-TG3034) Note: LIf you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call, press {OFF}, then press {C}. LWhen paging a unit for an intercom call, the paged unit beeps for 1 minute. Making an intercom call Handset 1 {INTERCOM} 2 {V}/{^}: Select the desired unit. i {Select} LTo stop paging, press {OFF}. 3 When you finish talking, press {OFF}. Base unit KX-TG3031/KX-TG3032/KX-TG3033/ KX-TG3034 1 {INTERCOM} LAll the registered handsets beep for 1 minute. LTo stop paging, press {INTERCOM}. 2 When you finish talking, press {INTERCOM}. Answering an intercom call Handset 1 Press {C} or {s} to answer the page. 2 When you finish talking, press {OFF}. Base unit KX-TG3031/KX-TG3032/KX-TG3033/ KX-TG3034 1 Press {INTERCOM} to answer the page. 2 When you finish talking, press {INTERCOM}. Note: LWhen the ringer volume is set to off, the handset or the base unit rings at a low level for intercom calls. Handset locator You can locate a misplaced handset by paging it. 1 Base unit: {LOCATOR} LThe handset beeps for 1 minute. 2 To stop paging: Base unit: Press {LOCATOR}. Handset: KX-TG3021 Press {OFF}. KX-TG3031/KX-TG3032/KXTG3033/ KX-TG3034 Press {INTERCOM}, then press {OFF}. For assistance, please visit Multi-unit Operation Transferring calls between handsets, conference calls Outside calls can be transferred between 2 handsets. 2 handsets can have a conference call with an outside party. 1 During an outside call, press {INTERCOM} to put the call on hold. 2 {V}/{^}: Select the desired unit. i {Transfer} 3 Wait for the paged party to answer. LIf the paged party does not answer, press {C} to return to the outside call. 4 To complete the transfer: Press {OFF}. LThe outside call is being routed to the handset. To establish a conference call: Press {Conf}. LTo leave the conference, press {OFF}. The other parties can continue the conversation. LTo put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}. Answering transferred calls Press {C} to answer the page. LAfter the paging party disconnects, you can talk to the outside caller. Registering a handset The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. 1 Handset: {MENU} i {0}{0}{1} 2 Base unit: KX-TG3021 Press and hold {LOCATOR} until the IN USE indicator flashes. KX-TG3031/KX-TG3032/KXTG3033/ KX-TG3034 Press and hold {LOCATOR/ INTERCOM} until the IN USE indicator flashes. LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 3 Handset: Press {OK}, then wait until a beep sounds. 4 {OFF} Registering an additional handset See page 5 for information on the available model. Start from step 2. Deregistering a handset 1 {MENU} i {0}{0}{2} 2 {3}{3}{5} i {OK} 3 Select the handset you want to cancel by pressing the desired handset number ({1} – {4}). Note: LIf you do not use the handset, we recommend removing the battery to prevent malfunctioning. For assistance, please visit Useful Information For assistance, please visit 37 Wall mounting Base unit 1 Insert the hooks on the wall mounting adaptor into the holes 1 and 2 on the base unit. 2 While pressing down the lever (A), press it in the direction of the arrow (B) until it is secure. 3 Tuck the telephone line cord inside the wall mounting adaptor and connect the cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it. Connect the AC adaptor to power outlet (page 9). LThere are two common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed. 1 2 2 1 A B AC adaptor cord 83 mm (3 1/4 inches) 102 mm (4 inches) 2 1 83 mm (3 1/4 inches) or 102 mm (4 inches) 1 (120 V AC, 60 Hz) 2 Useful Information To remove the wall mounting adaptor While pushing down the lever (A), remove the adaptor (B). AB Charger Headset (optional) Connecting a headset to the handset allows hands-free phone conversations. We recommend using the Panasonic headset noted on page 5. Available model: KX-TG3032/KX-TG3033/ KX-TG3034 1 Drive the screws (not included) into the wall. 25.4 mm (1 inch) Screws (120 V AC, 60 Hz) 2 Mount the charger (A), then slide it down (B) and to the right (C) until it is secure. LHeadset shown is KX-TCA86. Switching a call between the headset and handset speakerphone To switch to the handset speakerphone, press {s}....