valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
Telephone For assistance, please call: 1-800-211-PANA(7262) 31 Using the Caller List What “v” means “v” indicates you have already viewed this calling information or answered the call. If the same caller calls again, the call entry with the “v” will be replaced with the new call entry. If a caller calls more than once The number of times the same caller called is displayed (“.2” to “.9”). The date and time of the most recent call will be recorded. After viewing a caller’s information, “.2” to “.9” will be replaced with “v”. Calling Back from the Caller List SMITH,JACK 1-555-333-4444 3:10P JUN.10 v Ex. Called 3 times. TURNER,CINDY 1-555-456-7890 11:20A JAN.12 .3 Handset 1 Press the soft key ( CID ), [d], or [B] to enter the Caller List. 2 Scroll to the desired caller by pressing [d] or [B]. 3 Press [C] or [s]. • The phone number is dialed. • In some cases, you may have to edit the number before dialing (p. 33). (Ex. You may have to delete “1” and the area code.) • If a phone number is not displayed in the caller information, you cannot call that caller back from the Caller List. Using the Caller List Editing the Caller’s Phone Number Handset You can edit a phone number in the Caller List by removing its area code and/or the long distance code “1”. Once you call back an edited number, this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call (Caller ID Number Auto Edit, p. 34). Telephone 1 Press the soft key ( ), [d], or [B] to enter the Caller List. 2 Scroll to the desired caller by pressing [d] or [B]. 3 Press the soft key ( ) repeatedly until the number is shown in the desired format. • Each time you press the soft key ( ), the number is rearranged into one of 3 patterns. FG– H 1– – CI D PARKER,FRED1-555-321-5555 EDIT EDIT Phone no. Area code Phone no. Area code Phone no. 555-321-5555 G321-5555 F1-555-321-5555 H • The order in which patterns F–H are displayed depends on how the telephone number is displayed in step 2. 4 To call the edited number, press [C] or [s]. • If Caller ID Number Auto Edit feature is turned on (factory preset is on), phone numbers with the same area code as the number you edited will now be edited in the Caller List and each time you receive a call. • You can press [OFF] immediately after pressing [C] or [s] if you wish to activate the Auto Edit feature without actually dialing the number you just edited. To save the edited number into the phone book, press the soft key ( SAVE ). • If there is no name information, see “Storing Caller Information in the Phone Book” on page 35, from step 3. • Even if the Auto Edit feature is turned on, this feature will not be activated by saving the edited number in the phone book. • If you receive a call from a 7-digit phone number stored in the phone book, “ EDIT ” will not be displayed when the call’s Caller ID information is displayed. 33 For assistance, please call: 1-800-211-PANA(7262) Using the Caller List Caller ID Number Auto Edit Handset Once you call back an edited number (p. 33), this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call. For example, it can ignore the area code of calls originating from your area code, so that you can call these numbers from the Caller List without dialing the area code. To activate this feature, you must edit a caller’s phone number in the Caller List (p. 33) by selecting pattern F, G, or H, then make a call to that number. Calls from numbers in that area code will be edited automatically. The unit can remember up to 4 area codes to be edited according to patterns F and G. When more than 5 area codes are edited, older area codes are reset to pattern H. Phone numbers from the 4 most recently edited area codes will be automatically edited. You can turn this feature on or off using the handset. The factory preset is ON. To turn on or off Caller ID Number Auto Edit feature 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting 3 Scroll to “Caller ID edit” by pressing [d] or [B], then press the soft key ( SELECT ). Caller ID edit 4 Select “Off” or “On” by pressing [d] or [B]. Auto edit :On 5 Press the soft key ( SAVE ), then press [OFF]. • If you fail to reach your destination when making a call, the phone number you dialed might have an incorrect pattern. Edit the phone number with another pattern (p. 33). • When this feature is turned off, the unit will still be able to display Caller ID, but incoming Caller ID numbers will not be automatically edited. • If you move to another area you may need to turn this feature off to erase the previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to be edited once again. Using the Caller List Storing Caller Information in the Phone Book Handset Caller names and phone numbers that are in the Caller List can b...