valutazioni - 3, GPA: 3.3 ( )

Produttore : Panasonic File Size : 2.08 mb File Nome : KXTG7731-MUL.PDF Lingua di insegnamento:

When Spanish is selected, 24-hour clock format is used. R The date and time may be incorrect after a power failure. In this case, set the date and time again. Display language You can select either “English” or “Espanol” as the display language. The default setting is “English”. 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN Voice guidance language You can select either “English” or “Espanol” as the voice guidance language of the answering system. The default setting is “English”. 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. 3 MSAVENaMOFFN For assistance, please visit Link to Cell Link to cell feature To use this feature, you must first register and connect your cellular phones to the base unit (page 18). Your cellular phones must have Bluetooth wireless technology that is compatible with this product. This feature allows you to: – make or answer cellular calls using your home phone (handset or base unit) with better reception. – maximize the benefits of cellular services (such as free night and weekend calls, or cellular to cellular call plans) by utilizing unused peak minutes with your home phone. – conserve the battery power of your cellular phone while the unit is on a cellular call. (We recommend charging your cellular phone during the cellular call as your cellular phone battery is being consumed.) Important: R Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time. R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit. Trademarks R The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. All other trademarks identified herein are the property of their respective owners. Registering a cellularphone Important: R For more details and the list of compatible cellular phones, please visit our Web site: R Before registering a Bluetooth enabled cellular phone to the base unit: – we recommend you change the PIN (page 21). – make sure that no Bluetooth device such as a Bluetooth headset is connected to your cellular phone. 1 Handset: MMENUN For CELL 1: #6241 For CELL 2: #6242 R After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellular phone to enter the registration mode. R Depending on your cellular phone, it may ask you to enter the base unit PIN (default: “0000”). 3 Handset: Wait until a long beep sounds. R It may take more than 10 seconds to complete registration. R When the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to the base unit. You are ready to make cellular calls. 4 To select which unit receives calls for the cellular line, press MOKN then continue from step 3, “Selecting which unit receives cellular calls”, page 19. R If not required, go to step 5. 5 MOFFN Note: R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone’s operating instructions. R Make sure you cancel your cellular phone’s current registration if you want to register it to the other line (page 21). For assistance, please visit Link to Cell Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring. 1 MMENUN 2 For CELL 1: #6271 For CELL 2: #6272 3 MbN: Select the desired handset or “All”. 4 MSAVENaMOFFN Note: R When you select a specific handset to receive calls for a cellular line: – other handsets cannot answer the calls. – the base unit can answer the calls even though it does not ring. However, you can make the base unit ring by adjusting the base unit ringer volume (page 35). (KX-TG7741 series: page 3) R When you change the setting to “All”, the base unit ringer volume also returns to the lowest level even if the ringer volume has been changed. Ring as cell mode Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone. The following settings are available: – “Off”: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Tal...

Scarica la tua

Per scaricare, digitare 2 cifre :