valutazioni - 0, GPA: 0 ( )

Produttore : Philips File Size : 864.93 kb File Nome : Lingua di insegnamento:

N° 73/23/EEC, 89/336/EEC, 91/263/EEC and 93/68EEC. Power requirements This product requires an electrical supply of 230 volts, alternating monophased current, excluding IT installations defined in standard EN 60-950. Warning: The electrical network is classified as dangerous according to criteria in the standard EN 60-950. The only way to power down this product is by unplugging the power cable from the electrical outlet. Make sure the electrical outlet is located close to the apparatus and is always easily accessible. It is recommended that this telephone be used as a complement to another telephone which does not require mains power. Safety precautions •Do not allow the handset to come into contact with water. •Do not open the handset or the charger. This could expose you to high voltages. Contact our after-sales service for all repairs. • Do not allow the charging contacts or the battery to come into contact with conductive materials such as keys, paper clips, rings, bracelets, etc. •Make sure you insert the batteries with their polarities in the correct position. Contents Introduction 2 Installing your extra handset 3 Deciding where to put the charger 3 Installing the charger on a horizontal surface 3 Mounting the charger on a wall 4 Charging your handset 5 Selecting the menu language 5 Registering your extra handset with your Onis base station 6 Changing the name of your base station 7 Using your extra handset 8 Making an outside call 8 Answering an outside call 9 Making an internal call 9 Answering an internal call 10 Using the handset loudspeaker 10 Managing the Baby Sit mode 10 Transferring calls 11 Managing a conference call 12 Locking the handset keypad 12 Using the battery saver 13 Maintenance 14 Changing the battery 14 Caring for your handset 15 Contents 5 Introduction Your Onis extra handset comprises: • a charger, • a handset, • a power cable. • 2 standard AA/R6 rechargeable batteries. This guide shows you how to install and use your Onis extra handset. Please refer to the corresponding Onis user manual for information on: • using the phonebook, • using the answering machine (Onis memo and Onis Vox only), • troubleshooting. Note: You should also refer to the manufacturer’s handbook corresponding to the base station with which you are using this handset. Introduction 6 Installing your extra handset 7 Installing your extra handset Deciding where to put the charger • Place the charger near a main outlet supplying 220-240V at 50Hz. • To reduce to a minimum any interference with other electronic devices such as telephones, televisions, screens, etc. we advise you to place your charger at least 50 cm from any other electronic device. • Place the charger on a flat surface as with the base station or mount it on a wall. • Significant obstacles such as concrete walls or metallic supports (windows and door frames, partitions, etc.) will lessen the communication range between the base station and the handset. Installing the charger on a horizontal surface Plug the power cable into the charger. Plug the power cable into the wall socket. Place the handset in the charger. 1 2 3 8 Installing your extra handset Mounting the charger on a wall Fix the screws (not supplied) according to the diagram below. Plug the power cable into the charger as shown on page 7. Mount the charger on the screws. Plug the power cable into the wall socket. Place the handset in the charger. 1 2 - 2.5 mm 8 mm 46 mm 1.5 - 2 mm 3 mm 2 3 4 5 Charging your handset Your handset is powered by 2 rechargeable AA/R6 batteries. Before you use your handset for the first time, charge it for at least 16 hours. This precaution helps to lengthen the life of the battery. To charge the handset, place it on the charger or on the base station. The b symbol will appear on the display to indicate that the battery is charging. When the b symbol disappears, your handset is fully charged. The charger ...

Scarica la tua

Per scaricare, digitare 2 cifre :