valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
English EN 37 3 Press [OK] to confirm. » All old messages are permanently deleted. Note • You can delete the read messages only. No deleted messages can be recovered. Call screening You can hear the caller while he is leaving a message. Then you can decide whether or not to talk to the caller directly. From the base Press / to adjust the speaker volume during call screening. The lowest volume level turns off the call screening. Set the sound quality of the message You can adjust the sound quality of the messages received from the answering machine. 1 Press menu. 2 Select [ANSWER MACHINE] > [SETTINGS] > [MSG QUALITY], then press [OK] to confirm. 3 Select the new setting, then press [OK] to confirm. » The setting is saved. Set the ring delay You can set the number of times the phone rings before the answering machine picks up the call. 1 Press menu. 2 Select [ANSWER MACHINE] > [SETTINGS] > [RING DELAY], then press [OK] to confirm. 3 Select a new setting, then press [OK] to confirm. » The setting is saved. Note • Ensure that the answering machine is switched on before this feature can be applied. Tip • When you access the answering machine remotely, you are recommended to set the ring delay to [ECONOMY] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up the call after 5 rings. Remote access You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code. Note • The preset remote access PIN code is 0000. Activate/deactivate the remote access You can allow or block remote access to the answering machine. 1 Press menu. 2 Select [ANSW. MACHINE] > [SETTINGS] > [REMOTE ACCESS], then press [OK] to confirm. 3 Select a new setting, then press [OK] to confirm. » The setting is saved. 38 EN English Access the answering machine remotely 1 Make a call to your home number with a touch tone phone. 2 Press # when the outgoing message star ts playing. 3 Enter your PIN code. » You now have access to your answering machine, and the new messages star t playing. Note • You have 2 chances to enter the correct PIN code before your phone hangs up. 4 Press a key to carr y out a function. See the Remote access commands table below for a list of available functions. Note • When no message plays, the phone hangs up automatically if no key is pressed for 8 seconds. Remote access commands Key Function 1 Repeat current or play previous message. 2 Play messages. 3 Skip to nex t message. 6 Delete current message. 7 Switch answering machine on (not available during playback). 8 Stop message playback 9 Switch answering machine off (not available during playback). EN 39 Note 15 Default settings • *Country dependent features Language Countr y dependent Handset name PHILIPS Date 01/01/09 Date format MM/DD Time 12:00am Time format 12-hour Alarm Off Phonebook list Unchanged Auto hang up On Recall time Countr y dependent First ring Countr y dependent Conference On Dial mode* Tone Area code* [Empty] Auto prefix [Empty] Handset ring melody Melody 1 Alarm tone Melody 1 Receiver volume Volume 3 Handset ring volume Level 3 Handset key beep On XHD sound On Incoming call log [Empty] Redial list [Empty] PIN code 0000 Answering Machine Ans machine status On Ans machine mode Ans & Rec Base call screening On Outgoing message Pre-recorded memor y OGM Incoming message [Empty] memor y Remote access Off Ring delay 4 rings Speaker volume Level 3 40 EN • Operation: 0°C to +35°C (32°F to 95°F) 16 Technical data • Storage: -20°C to +45°C (-4°F to 113°F) Relative humidity Display • Operation: Up to 95% at 40°C English • Amber LCD backlight General telephone features • Dual mode caller name & number identification • 5 standard ringer melodies and 5 polyphonic ringer melodies • Conference call and voicemails • Intercom Phonebook list, Redial list and Call log • Phonebook list with 100 entries • Redial list with 10 entries • Call log with 20 entries Battery • 2 x A AA NiMH 1.2V Rechargeable 650mAh batteries Adaptor • Base: Input 120V 60Hz 0.1A , Output: 6V 0-0.58mA • Charger: Input 120V 60Hz 0.1A , Output: 6V 0 -0.58mA Power consumption • Power consumption at standby mode: around 600 mW (CD360); 650 mW (CD365) Weight and dimensions (CD360) • Handset: 115 grams • 164.5 x 32 x 46.5 mm (H x D x W ) • Base: 107 grams • 79.5 x 107 x 108.5 mm (H x D x W ) Weight and dimensions (CD365) • Handset: 115 grams • 164.5 x 32 x 46.5 mm (H x D x W ) • Base: 130 grams • 79.5 x 107 x 108.5 mm (H x D x W ) Temperature range • Storage: Up to 95% at 40°C EN 41 17 Frequently asked questions The signal icon flashes. • The handset is out of range. Move it closer to the base station. If the handset displays [UNREGISTERED], register the handset. Tip • For more information, see “Register the handsets” on the Advanced settings section. IF I fail to register the additional handse...