In Idle mode / predialling mode / Redial list / Call List / Phonebook entry: Press to make a call with speakerphone During ringing: Press to answer a call with speakerphone FLASH (Recall) In idle / predialling mode: Press to insert a recall signal (also called Flash) During a call: Press to send a recall signal (also called Flash) MICROPHONE EARPIECE 9 3.2 Display Icons and Symbols The LCD display gives you information on the current status of the telephone. Steady when the handset is in range o

The screen will display 1. SET DATE 2 Press the VOL+ button twice. The screen will display 3 LCD BRIGHT. 3 Press the MUTE button. The screen will display BRIGHT and a series of “1” representing the display contrast. 4 Use VOL+ and VOL- to adjust the display contrast. 5 Press the MUTE button. The screen will display 3 LCD BRIGHT. 6 Wait a few seconds and the screen will go to idle and display the date and time Set the Interface 1 With the phone on hook, press the MUTE button. The screen will disp

Please note the following the batteries, but safety warnings: I still get a ¦ Use only NiMH (Nickel metal hydride) 1.2 V AAA warning that they rechargeable batteries in the handset. The best way to make are low.” sure you get the right batteries is to take the old ones with you when you go to buy new ones. ¦ Dispose of used batteries safely — never burn them, or put them where they could get punctured. PBX use “Last Number When you first make a call, try pressing the CDS button for a Redial and/

Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Do not use this telephone near a bathtub, kitchen sink, wash bowl, laundry tub, in a wet basement, near a swimming pool, or anywhere else where there is water. 4. Avoid using a telephone(other than a cordless type) during an electrical storm.There may be a remote risk of electric shock from lighting. 5. Do not use the telephone to report a gas leak in the vicinity of the leak. 6. Use only th

22 Binatone Help Line: 0845 345 9677 (Local Call rate) Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system Press the INTERCOM button on the handset. Intercom 1 call from the .. The display show CALL INT briefly, then handset the numbers of any other handsets registered to the base. Press the appropriate number to select and call that handset 2 The other handset rings, and its display shows INT # (where # is the number of the number of the calling han

2.6.1 English Character Set Key Alphanumeric Editing (For contacts name editing and renaming handset) Number Editing (For phone number editing, date/time editing) Key press 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 1 space - 1 1 2 A B C 2 2 3 D E F 3 3 4 G H I 4 4 5 J K L 5 5 6 M N O 6 6 7 P Q R S 7 7 8 T U V 8 8 9 W X Y Z 9 9 0 0 0, P (Pause) * * ? / \ ( ) * # # ‘ , - . & # to go to CONTACTS, the first option in the menu list. Press or to go to other options in the menu list. Press <

Presa again to turn on the speakerphone. In Redial list / Call List / Contacts entry: Press to make a call to the selected entry in the list. Press again to turn on the speakerphone. During ringing: Press to answer a call. Press again to answer with speakerphone. Steady on when the handset is within range of the base. Flashes when the handset is in marginal range of the base. Off when out of range of the base or cannot communicate with the base. Steady on when a call is in progress. Flashes when

The signal between the handset and the base is in accordance with the normal standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. Be aware that: > Any large metal object, such as a refrigerator, mirror or filing cabinet, between the handset and the base unit may block the radio signal. > Other solid structures, like walls, may reduce the signal strength. > Other electrical equipment may cause interference and/or affect the range. 3) Do not place close to anot

When entering the number, if you make a mistake, press to delete digits. 4.1.2 Direct Dialling Press to connect to the line and then enter the phone number. (Note: if you enter a wrong digit you cannot correct it with the key.) 4.1.3 Call from the phonebook Press

page 3 USING To set the time the Celestia will answer a call, to SETTINGS Recording your outgoing message 1 Press and hold until you hear a ‘beep’ 2 Speak clearly into the microphone Your outgoing message (OGM) can seconds long. The display shows the speak. Do not pause for more than 10 seconds. 09:35 13-10 02/05AM MSG 00-32 -5 OGM REC To check your OGM at 3 Press the PLAY/PAUSE/STOP button when any time you have finished speaking The machine will ‘beep’ then play back your OGM. pausestop • Pres