34 2.9.1 Missed Calls All unanswered calls will be listed here. You can use ‘Up’ and ‘Down’ to move in this list. Press ‘Dial’ to call the number selected, press ‘Delete’ to delete a selected entry, or press ‘Exit’ to return to previous menu. 2.9.2 Received Calls All accepted phone calls are listed here. You can press ‘Dial’ to call the selected number, ‘Delete’ to delete a selected number, or ‘Exit’ to return to the previous menu. 2.9.3 Placed Calls All dialed phone numbers will be listed here.

or Scroll UP or DOWN to select SOS NUMBER 1 to 3. Then press the MENU/OK/MUTE to select the one you want to program. Enter the phone number. Then press the MENU/OK/MUTE. You will hear a beep and the number is saved. If you want to save more SOS numbers, press the DOWN to select the next location you want to program,and repeat above steps. Press the PHONE BOOK/BACK until you return to idle mode. Binatone Help Line : 0845 345 9677 25 Advanced use of your phone To Turn on/off key tone Press the MEN

A de-registered handset will have the antenna flashing and REGISTER on the display. Note: You cannot de-register the handset that you are currently using. 1. Press

2. After 12 hours ,remove the HANDSET from the BASE UNIT. 3. Raise or reposition the BASE UNIT ANTENNA for the best reception. NOTE: Depending on the frequency of use, once the HANDSET is fully charged , it remains functional for approximately 4 hours of continuous use and approximately three days when the HANDSET is off the BASE UNIT in STANDBY mode. Receiving calls 1. When the phone rings, lift the HANDSET and press the button. The HANDSET LCD Screen will display "CALLS" and "TALK",and the BAS

Press will have no effect and an alert tone is emitted. 1. Press

The 4-digit remote access PIN code is used to prevent other people from unauthorised access of your answering machine. The default remote access PIN is 0000. 9.5.7.1 Change the 4-Digit Remote Access PIN 1. Press

base unit or access your answering machine remotely. . The default PIN is 0000; you can change it to any four-ditgit number you' ll remember. Press the MENU then the ^ or Ў button to go to . BASE Press the PHONE/OK button twice • The display shows . PIN 2 • The display shows . PIN. NEW Key in the new PIN and confirm using 4 PHONE/OK button The display shows . Pin NEW Key in the new PIN again and confirm using PHONE/OK button 5 • The PIN code is changed after ‘beep’. (If you key in a wrong PIN c

The SRST Cisco Unified CallManager always appears last in the list of servers, even if it is active. You configure an SRST router address in the Cisco Unified CallManager Administration SRST Reference Configuration page (choose System > SRST). You configure an SRST reference in the Device Pool Configuration page (choose System > Device Pool). TFTP Indicates that the phone was unable to register with a Cisco Unified CallManager listed in its configuration file and that it registered with the TFTP

This may take a short while. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration is unsuccessful, the will still flash and the display will return to "REGISTER", so you will need to repeat the registration process. 7.6 Reset Your Phone You can reset your phone to the default settings . Alter a reset, all your personal settings, call list entries and redial

4.9 Redial Last The handset saves the last 5 numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. The most recent last number will display at the top of the redial list. 16 4.9.1 Redial a Number from the Redial List 1. In idle mode, press to access the redial list. Note: If the redial list shows a name, press the < # > key to view thenumber of this entry. 2. Press to browse the redial list. 3. Press /