valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
Wall Mount Hole 2. Battery Compartment • Uses 3 x UM-3 / AA 1.5V batteries. 3. Channel 1 / 2 • Slide to select either Channel 1 or Channel 2. 4. Code switch • Slide to change the Code. 5. Mode - On / Off / Auto • Slide switch to ON - the nightlight will turn on in a dark room. • Slide switch to OFF - the nightlight is turned off. • Slide switch to AUTO - the nightlight will only be 1. Rotary Motion Sensor activated by motion in a dark room. • Detects motion and activates the nightlight and 6. Clock Control - On / Off clock backlight in accordance with the • Slide switch to ON - when motion is detected, settings used. the clock backlight will be activated. • Twist the knob to direct the sensor to the position • Slide switch to OFF - the clock backlight will not you want. be activated by the motion sensor. 2. Light Sensor 7. + Light - Rotary knob • Detects the light intensity of the environment. • Rotate to adjust the sensitivity of the light sensor. 3. Light ON 8. Reset button • Press to turn the clock backlight ON for 10 • Press to reset the nightlight. seconds remotely. 4. Power - ON / OFF • Slide to the appropriate setting to turn the battery or AC power ON or OFF. 5. 4.5V Adaptor Socket 6. Light Panel • When activated the panel will light up. 7. LED Indicator 3 1 2 3 4 6 7 5 1 2 3 4 5 6 7 8 EN JMR868A_EN_R6 3 09/21/2004, 11:08 EN SAFETY AND CARE GETTING STARTED SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. • LCD panel - The LCD panel is made of glass, and may break if the unit is dropped. • Heat sources - Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products. • Water and moisture - Do not use the product in or near water or in high moisture areas, such as a bathroom. • Power source - The product may be susceptible to power surges. It should be unplugged during severe storms or whenever you will be away for a long time. Only use the type of power source specified in this manual. Do not overload power strips and extension cords, as this can cause a fire hazard. CARING FOR THIS PRODUCT To ensure you receive the maximum benefit from using this product, please observe the following guidelines. • Do not clean any part of the product with benzene, thinner or other solvent chemicals - this may cause permanent damage that is not covered by the guarantee. When necessary, clean it with a damp cloth. • Keep your product away from hot, humid conditions or strong sunlight. • Every effort has been made to ensure the highest standards of reliability for your clock with remote nightlight. However, if something does go wrong, please do not try to repair it yourself - consult your supplier. • Do not use your product outdoors in the rain, or handle it with wet hands - water can damage electrical equipment. HOW YOUR CLOCK WORKS WITH THE NIGHTLIGHT - OVERVIEW • The clock can be set independently to give you time, calendar and alarm facilities. • The nightlight can be set independently to light up in the dark so you can see where you are going. • The clock and nightlight can also be used together to turn the clock backlight on when you walk into a dark room, or wave your arm from the comfort of your bed. It can do this because the nightlight has 2 types of sensor. One sensor responds to light and the other responds to movement. From the clock unit you can set these sensors to be active during a certain period of time. PACKAGE CONTENTS When you unpack your clock with remote nightlight, make sure you keep all the packing materials in a safe place, in case you need to later transport the device or return it for servicing. In the box, you will find: • Clock Unit • Remote Nightlight • 4 x UM-3 / AA 1.5V Batteries for the Clock • 3 x UM-3 / AA 1.5V Batteries for the Nightlight • 4.5V AC Adapter BATTERIES The clock uses: • 4 x UM-3 / AA 1.5V batteries. The nightlight uses: • 3 x UM-3 / AA 1.5V batteries. NOTE It is recommended that you use alkaline batteries with this product for longer performance. To install the batteries, simply insert them making sure they match the correct polarities (+ and -). 4 JMR868A_EN_R6 4 09/21/2004, 11:08 ENNOTE The nightlight has a Power ON / OFF switch to Clock: Nightlight: NOTE Replace the batteries whenever the low battery icon is displayed. Change all the batteries at the same time - it is dangerous to mix old and new batteries. Protect your environment by taking exhausted batteries to authorized disposal stations. shows on the clock display when the batteries are low. The LED indicator on the motion sensor will flash in red when the batteries are low. AC ADAPTOR The 4.5V AC adaptor connects to the nightlight as shown below. help conserve power. Use the AC adaptor when using the nightlight for long periods of time. The batteries are a good power source for back-up usage. ABOUT ATOMIC CLOCK RECEPTION This clock can automatically synchronize the date and time with an official time-kee...