valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Secure the sensor in the desired location using the wall mount hole or double sided adhesive tape. For best results: • Place the sensor within 30 m (100 ft) of the main unit. • Place the sensor out of direct sunlight and moisture. • Position the sensor so that it faces the main unit, minimizing obstructions such as doors, walls and furniture. • Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects. • Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. MAIN UNIT INSTALLATION • Plug AC/DC adaptor into socket. Make sure the adapter is not obstructed and is easily accessible to the unit. To completely disconnect from power, the adapter should be disconnected from the main unit. NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter. Memory backup: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the polarities (FIG. 2). Batteries serve as a back-up power supply. To fully utilize all features, install adapter. NOTE Batteries should not be exposed to excessive heat such as sunshine or fire. CLOCK CLOCK RECEPTION This product is designed to synchronize its clock automatically with a clock signal received from provided remote sensor. To enable / disable signal reception: Press and hold + to enable or - to disable signal reception. NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. Clock signal reception indicator: STRONG SIGNAL NO SIGNAL NOTE Clock reception is dependent on the successful transmission of data from remote sensor. If is displayed, check first for sensor reception. MANUALLY SET CLOCK 1. Press and hold SET . 2. Press + or - to change the settings. 3 Press SET to confirm and move to the next setting. The setting options are as follows: time-zone offset, 12/24 hr format, hour, minute, year, month-day / daymonth, day and month. Time zone offset sets the clock +/- 23 hours from the received clock signal time. ALARM To set the alarm: 1. Press SET or SET to display desired set alarm time. 2. Press and hold SET or SET to enter respective setting. 3. Press + / - to change the settings. 4. Press SET or SET to confirm and move to the next setting. The setting options are as follows: hour, minute, beep alarm / radio alarm . To adjust station and volume: • If radio alarm is selected, press + / - to select the radio station and + / - to adjust the volume. To activate / deactivate alarm: • Press ALARM 1 ON / OFF or ALARM 2 ON / OFF. To silence the alarm: • Press SNOOZE / SLEEP to silence it for 8 minutes OR • Press SET / SET , / , to turn the alarm off and activate it again after 24 hours. RADIO To activate / deactivate radio: • Press RADIO ON / OFF to turn radio ON / OFF. To set radio station: 1. Press RADIO ON / OFF or SNOOZE / SLEEP to enter Radio Mode. 2. Press STATION to scroll through preset station numbers (1-8). 3. Press and hold TUNE + / TUNE – to auto search or press TUNE + / TUNE - to manually select frequency. 4. Once desired frequency has been found, press and hold STATION to save. To adjust volume: • Press VOL + / VOL – when in Radio Mode. To adjust sleep timer setting: 1. Press SNOOZE / SLEEP to activate. 2. Press SNOOZE / SLEEP again to change the sleep time setting (120, 90, 60, 30, 15, 0 min). PROJECTION This unit projects time and outdoor temperature information for your convenience. For continuous projection: • Slide PROJECTION switch to ON when adaptor is connected, to enable / disable. To flip projected image by 180°: • Press 180o Flip. To focus image: • Turn FOCUS wheel. NOTE If projection is illuminated, do not look directly into the projector. RESET Press RESET to return to the default settings. SPECIFICATIONS MAIN UNIT TYPE DESCRIPTION L x W x H 183 x 67 x 81mm (72 x 26.4 x 31.9in) Weight 386 g (13.6 oz) without battery FM 87.5 to 108 MHz Power 6V AC adaptor 2 x UM-4 (AAA) 1.5V batteries (for backup) REMOTE RF CLOCK THERMO SENSOR TYPE DESCRIPTION L x W x H 117 x 80 x 171 mm (4.78 x 3.27 x 6.98 in) Weight 241 g (8.5 oz) without battery Temperature range -20°C to 60°C (-4°F to 140°F) Resolution 0.1°C (0.2°F) Signal frequency 433 MHz Transmission range 30 m (98 ft) unobstructed No. of channels 5 Power 1 x UM-3 (AA) 1.5 V batteries PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity • Do not cover the ventilation holes with any items such as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-f...