This has been fixed. 2. Line transmission audio will be muted when in HSSB bridged mode and in Hold state. This fix affects VTX -VSX bridge calls only. UI 1. Changes to ensure VTX mute indications will match VSX, particularly when going from idle/on-hook (and muted) to off-hook/redial, or when receiving incoming VTX call while system is muted. 2. Corrected typographical errors in the Admin Setup title setup with passcode set and in menu numbering. 3. Allow ability to press “#” and “*” fast

Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. • This product has a sweep second hand. TO START CLOCK Insert a battery into battery compartment (©) with polarity as indicated. TO SET TIME Turn the hour/minute adjuster (@) in either direction. TO ADJUST SECONDS Remove the battery to stop the second hand at 12 o’clock position. Replace the battery at a t

Stable Real Time Clock for PCs Model PCRTC Documentation Number PCRTC2095 This product Designed and Manufactured In Ottawa, Illinois USA of domestic and imported parts by B&B Electronics Mfg. Co. Inc. 707 Dayton Road --P.O. Box 1040 --Ottawa, IL 61350 PH (815) 433-5100 --FAX (815) 433-5105 Internet: orders@bb-elec.com support@bb.elec.com . B&B Electronics March 1995 Documentation Number PCRTC2095 Manual Cover Page B&B Electronics --PO Box 1040 --Ottawa, IL 61350 PH (815) 433-5100 --FAX (815) 433

•Your Digital Thermo-Clock is an example of superior design and craftsmanship. • In order to optimize its functions, be sure to read this instruction manual carefully before use. • Keep this manual handy for future reference. FEATURES • Digital LCD Thermometer with Clock. •Temperature/Clock alternate display function at 3 seconds cycle. • User selectable indoor or outdoor temperature measurement. • User selectable °C or °F temperature units of measure. •Wall mounting and table standing feature.

To Use Digital Timer Slide Switch To “Timer” To Set the Current Time While time appears in the LCD. . Push “Set Time” button once. The time display will be flashing. (If the display stops flashing before you finish, just push “Set Time” again to continue.) . Push the “Day” button until the current day appears on top. . Push the “Hour” button until the current hour appears. Be sure to cycle through the hours until AM or PM appears to the right of the time. . Push the “Min” button until the curren

BLUE - Night Dimming: connect to the head light switch. BLACK - connect to a main ground location Mounting: The gauge requires an oval hole 1-7/16” high x 3-1/16” wide. It should be inserted into the opening from the front and the 2 L-clamps will be installed from the back. Tighten a nut on each of the L-clamps so that the gauge is secure. Gauge depth to the back of the case is 1”. Gauge depth including the mounting studs is 1-7/8”. Operation: The gauge needs the red, orange, and black wires con