valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Sound is flat at the center position. Turn to the right to increase sound (to approximately +12 dB at 50 Hz) Turn to the left to decrease sound (to approximately –24 dB at 50 Hz) 5 Use the channel fader to adjust the volume Select the CH2-CH4 source and adjust volume and sound (Same as instructions 3 - 5 indicated on the left) 6 When using the cross fader Turn [ASSIGN A] and [ASSIGN B] to select the input channel to assign and •Select different input channels using the ASSIGN A and ASSIGN B switches. If the same input channel is selected by both switches, the volume will remain unchanged even when the cross fader is operated. •The channel selected with ASSIGN A is assigned to , the channel selected with ASSIGN B is assigned to . Unassigned channels are not output through the cross fader. 1-4: Assigned channels 1 to 4 THRU: When not using the cross fader 7 When using the cross fader Use [CROSS FADER] to adjust the mixing level The mixing level of the source audio assigned to and is adjusted by varying the position of the cross fader. 8 Turn [MASTER LEVEL] and [MASTER BALANCE] to adjust the volume and balance Adjust the master output volume and left (L) and right (R) balance. •Input source audio from the selected channels CH1-CH4 is mixed and output through the MASTER OUT 1 left (L) and (R) terminals. •Even if the MASTER LEVEL or the MASTER BALANCE is changed the REC OUT or DIGITAL OUT output does not change. 1 Turn [L/R SPLIT (CH1 CH2)] and [L/R SPLIT (CH3 CH4)] to OFF Select CH1 or CH2 input, CH3 or CH4 input to use the PLAY MODE's (L) and (R) individual adjustment feature ( page 12). Using CH1 input 2 Switch [SEPARATE OUT] to OFF Turn on to activate the play mode SEPARATE OUT function ( page 12). RQT7230 10 Using the microphone Turn [MIC LEVEL], [HIGH] and [LOW] to adjust volume and sound Adjusts the microphone volume and sound connected to MIC 1 and MIC 2 terminals. MIC LEVEL: Adjusts the microphone volume (Attenuation: – . to 0 dB) HIGH: Adjusts the high tone microphone sound. Sound is flat at the center position. Turn to the right to increase (to approximately +12 dB at 10 kHz) Turn to the left to decrease (to approximately –24 dB at 10 kHz) LOW: Adjusts the low tone microphone sound. Sound is flat at the center position. Turn to the right to increase (to approximately +12 dB at 100 Hz) Turn to the left to decrease (to approximately –24 dB at 100 Hz) •Input of MIC 1 and MIC 2 is mixed and output through the MASTER OUT 1 left (L) and right (R) terminals. Note The channel fader and cross fader used with this unit are designed for extended use however, depending on the way they are being used (e.g. quick, repetitive movements such as Hip Hop transfer play,etc.) replacement may be necessary. •Contact your nearest dealer to have your channel fader and or cross fader replaced. •To the dealer: The “Fader Replacement Instructions” are included with the replacement product. Replacement part number Channel fader (Part No. REP3743A-S) Cross fader (Part No. REP3742A-S) Mixing (Basic operations) Changing the channel fader, cross fader operation method Use the channel fader switch to change the operation method for each channel. (e.g. using CH1) Switch [CH1 FADER] and [CROSS FADER] NORMAL: Operation is as indicated on the panel REVERSE: Operation is reverse as indicated on the panel Changing the cross fader curve Select from 1 of 3 types of cross fader startup curves. Switch [CURVE] Output level meter display •The mixed left (L) and right (R) volume level of the selected channel (CH1-CH4) is displayed in the LEFT and RIGHT columns of the output level meter. Display range: –20 to +8 dB •Even if the MASTER LEVEL or MASTER BALANCE is changed the OUTPUT LEVEL meter display does not change. OUTPUT LEVEL meter Recording and playing on external equipment You can record and play on externally connected equipment. Using the REC OUT terminal The same source as MASTER OUT 1 is output. Using the DIGITAL OUT terminal The same digital signal source as MASTER OUT 1 is output. Even if the MASTER LEVEL or the MASTER BALANCE is changed the REC OUT or DIGITAL OUT output does not change and recording or play remains unaffected. RQT7230 11 Additional mixing operations Adjusting the monitor You can check the sound on the headphones etc. during play and cue the channel you want to mix, and adjust the volume and check the mixing sound. Monitoring CH1 1 Press [CUE CH1] to turn on the monitor sound •The display lamp lights once the CUE button is pressed. •Monitor sound from the selected channel is output to PHONES (Headphones) and MONITOR OUT terminal. •Mixed sound can be output by pressing multiple CUE buttons. When using an effector ( left side of this page) Press [CUE EFFECT] to turn on the monitor sound •Monitor EFFECT RETURN is output. 2 Select the input, adjust the input level, sound, and adjust the volume with the channel fader and cross fader ( page 9, Mixing, instructions 3 - 7) 3 Turn [MIXING] and adjust mixing •Turn completely to t...
Questo manuale è adatto anche per i modelli :Ricevitore e l - RQT7230-3Y (1.84 mb)