valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
To view this device: 1. Turn on the TV and the device you want to view. 2. Press the TV button on the remote control to put the remote in TV mode. Press the INPUT button on the remote control to scroll through the Video Input Channels until you see HDMI 1 Input displayed in the channel banner. See picture below for location. Note: You can set up the TV to automatically tune to the correct device you want to view. This is called Auto Tuning. See Chapter 3 for more information on Auto Tuning. Input channel appears here Program Title/Acquiring Channel 12:39 PM HDMI 1 Input • If you are done connecting devices to your TV, go to page 19 to complete the Assisted Setup. • To find out more about connecting audio/video receivers, go to the next page. Chapter 1 17 Cfci1 "ecticnB & Setup Advanced Audio Connection Information With the audio versatility of your HDTV, you can choose various connection options depending on the type and quality of sound that you want. From good to best sound, choose one of the options or refer to the user’s manual of each device that you are connecting to get the best results. • Use your TV’s internal speakers (good sound). • Connect an audio receiver (speakers connected to receiver) to your TV (better sound). • Connect an audio receiver (speakers connected to receiver) to your TV using the DIGITAL AUDIO OUTPUT (OPTICAL) jack (best sound) Audio cables are color coded- Red= right audio; white= left audio Digital Optical cable Connecting Your TV to an Audio/Video Receiver For better sound quality than the TV’s internal speakers, connect to an audio receiver using audio cables to the TV’s AUDIO OUTPUT jacks. • Use the FIXED/VARIABLE AUDIO OUTPUT for a more advanced connection. Connect the FIXED/ VARIABLE AUDIO OUTPUTS from the TV to an A/V receiver using audio cables. Be sure to go to the Fixed/Variable Out screen in the Advanced Audio menu and select whether you want the FIXED/VARIABLE AUDIO OUTPUT jacks to send fixed or variable volume audio. • Variable Output provides variable-level audio output. Volume levels are controlled by the TV’s volume. • Fixed Output provides fixed-level audio output from the TV. This audio output is ideal for connecting to an A/V receiver that has its own volume control. Connecting Your TV to a Receiver with Dolby® Digital If you own a receiver with Dolby® digital decoding or PCM (Pulse-Code Modulation) that uses an optical cable-type input, connect an optical cable for excellent audio quality. • Connect one end of the optical cable to the DIGITAL AUDIO OUTPUT (OPTICAL) jack on your TV and to the Digital Optical Input jack on your receiver/amplifier receiver. • If your receiver can decode Dolby digital and PCM, go to the Audio menu, select Advanced Audio menu, then Digital Audio Output. Select AutoSelect (recommended) or PCM. • If your receiver can decode only PCM, select PCM. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. 18 Chapter 1 Cfci mecticns & Setup Plug in the TV Plug the flat end of the cable into the power jack on the back of the TV. Then plug the other end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug the TV into an outlet controlled by a light switch. Note: When you first plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 seconds and then go off during the initialization of the TV. This happens only when the TV is unplugged and plugged back in. The TV can only be turned on after the Power indicator goes off. Put Batteries in the Remote • Remove the battery compartment cover from the back of the remote by pushing down on the tab and lifting cover. • Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly with the polarities inside the remote. • Replace the cover. Turn on the TV Press TV on the remote, or press the Power button on the TV’s front panel. Note: Pressing the TV button turns on the TV and puts the remote into TV mode so that the remote operates the TV’s functions. Tip To access the initial setup menus at a later time, press MENU, choose Setup Options, then Assisted Setup. Use the Remote Control to Complete the Assisted Setup The technical term is “Navigation” — how you move through the on-screen menus. The method is the same throughout the menu screens: highlight your choice and select it. To use the TV’s menus, first press the TV button on the remote control to put the remote in TV mode. When the Assisted Setup screen appears, use the arrow buttons to highlight one of the items listed in the menu. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left. To select the item that you’ve highlighted, press OK. Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color). Complete the Assis...