valutazioni - 5, GPA: 3.6
(
)
)
|
Facilità d'uso
Press the OK key -done! N.B.: The unit detects channels, which are already stored in the current favourite list - if this is the case the equal symbol (=) is displayed in the grey bar. N.B.: If you have accidentally deleted channels or wish to cancel the changes made, then exit the menu using the E key and then press the E key again. Any changes made will not be stored until you press the OK key. 4.1.2 Changing the favourite name Call up the list using the OK key. Select the input field {NAME} using the keys 0...9 or WV and activate by pressing OK. You can select letters (upper or lower case) or numbers using the Wor Vkey. You can shift the input position right or left using the Bor Ckey. After inputting the desired name, the input field is deactivated again by pressing the OK key. 4.1.3 Channel pool (for advanced users) The channel pool contains all channels in alphabetical order. Selection depending on satellite is done using the M key; free or encrypted channels are chosen by pressing the TV key. All free (or all encrypted) channels on the selected satellite are contained in the «All Free» section, also the new free or encrypted channels after performing satellite search mode. WVSelect channels in rows. CBSelect channels in columns. All selected channels are set immediately by the receiver and indicated in the background. In the case of scrambled channels the relevant CA module must be provided. The screen transparency can be changed using the F key and (within 2 seconds) the Cor Bkey. M Selection of satellite using the M key. TV Selection of free or encrypted channels using the TV key. G After pressing the MUTE key, individual channels can be deleted - e.g. channels that are no longer on the air. R The channel pool activated using the M and TV keys can be managed here, i.e. all «unused» channels or also all indicated channels can be deleted. (Cf. MANAGING under point 4.5.2) Show antenna signal and reception parameters. GB If necessary, you can align your parabolic antenna using the sub-menu «Antenna signal». Turn the antenna to the optimum position in the scales indicating field strength and signal reception quality. If the signal is very weak, the field strength scale may also fall to 0 - in which case you should optimise the signal using the reception quality scale. If the message «No signal» appears and only the field strength signal is indicated, the antenna may be aligned with a satellite for analogue signals (which cannot be received by this receiver). 13 4.1.4 Parental control The five-digit security code (PIN) is set to 0 0 0 0 0 in the factory by default. a) Changing the security code (PIN) Select the «Parental control» menu using key 4 from the Main menu «Channels». Then select the {PIN} input field using key 2 or the W key and activate it by pressing the OK key. Enter the ‘old’ and your ‘new’ PIN in the following sequence. 1. Please enter the current PIN. (= 0 0 0 0 0 for first use) 2. Please enter the new PIN. 3. Please repeat the new PIN. N.B.: Do not forget your PIN. Resetting to the default settings is only possible by factory customer service! All channels are accessible using the default settings - you can block each individual channel against unauthorised access. Marking the channels to be blocked is done either via the «Favourite list» or «Channel pool» menus using the RC key. After marking, the channel name is preceded by a «?», after which the next channel is called up to enable marking of several channels by repeatedly pressing the RC key. To delete the marking, press the RC key again when the relevant channel is highlighted. Example: Sky News ? Super Action ? Super Spezial Sudwest BW b) Activating the parental control To activate blocking of the channels marked «?», switch ON the {Security} input field in the «Parental control» menu and confirm by pressing the OK key when exiting the menu. When calling up the marked channels you will be required to enter your own five-digit PIN. N.B.: Please note that, when the parental control is activated, the «Favourite list», «Channel pool» and «Search mode» menus can only be accessed by entering the five-digit PIN. This is to prevent overriding the parental control function, e.g. by deleting the marking or adjusting the blocked channels via the transponder search mode (... the block also cannot be overridden using the timer). N.B.: To deactivate the parental control temporarily, e.g. in the evening, you can switch the {Security} input field to OFF in the «Parental control» menu. The «?» marking is not cancelled in this mode and appears again when the parental control function is reactivated, i.e. when the {Security} input field is switched to ON again. 4.2 SEARCH MODE 4.2.1 Satellite search mode Satellite search mode is performed for all frequencies on the selected satellite. Select the desired settings in the menu sequence. Selecting the individual parameters is performed after activating using the OK key and then using the Bor Ckey. We reco...
Questo manuale è adatto anche per i modelli :Ricevitore e l - DSR2000/00M (348.31 kb)