valutazioni - , GPA:
(
)
)
Produttore : Sony
File Size : 9.81 mb
File Nome : 3289204423.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
da questo dispositivo ha anche altre istruzioni :
Ricevitore e l - STR-DA2400ES (4.84 mb)
Ricevitore e l - STR-DA2400ES (15.31 mb)
Ricevitore e l - STR-DA2400ES (17.34 mb)
Facilità d'uso
Index name does not appear when only blank spaces have been entered, or it is the same as the input name. b) During RDS reception only (Models of area code CEL, CEK, ECE only) (page 75). Note Character or marks may not be displayed for some languages. Tip You cannot switch the display while “GUI MODE” is shown on the display window. Press GUI MODE repeatedly to select “GUI OFF”. 90GB About the indicators on the display window □□D + EX TrueHDNeural-TNX DTS-ES96/24D.RA JTS - HDMSTR HI RES |DMP( Name Function A SW Lights up when subwoofer is connected and the audio signal is output from the SUBWOOFER jack. While this indicator lights up, the receiver creates a subwoofer signal based on the LFE signal in the disc being played back or the low frequency components of the front channels. B LFE Lights up when the disc being played back contains an LFE (Low Frequency Effects) channel and the LFE channel signal is actually being reproduced. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. C COAX Lights up when INPUT MODE is set to “AUTO” and the source signal is a digital signal being input through the COAXIAL jack or when INPUT MODE is set to “COAX” (page 87). I I ! NE0:6 □□ PL IEQIIBI-AMPI 21 NGE_ Mono Name Function D OPT Lights up when INPUT MODE is set to “AUTO” and the source signal is a digital signal being input through the OPTICAL jack or when INPUT MODE is set to “OPT” (page 87). E ; d/ ; d ex/ ; d+/ ; TrueHD “□□ D” lights up when the receiver is decoding Dolby Digital signals. “□□ D EX” lights up when the receiver is decoding Dolby Digital Surround EX signals. “□□ D+” lights up when the receiver is decoding Dolby Digital Plus signals. “□□ TrueHD” lights up when the receiver is decoding Dolby TrueHD signals. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is set to “AUTO” (page 87). F Neural-THX Lights up when the receiver applies Neural-THX processing to input signals. continued 91BB Other Operations Name Function Name Function G DTS/ DTS-ES/ DTS 96/24 “DTS” lights up when the receiver is decoding DTS signals. “DTS-ES” lights up when the receiver is decoding DTS-ES signals. “DTS 96/24” lights up when the receiver is decoding DTS 96/24 (DTS 96 kHz/24 bit) signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is set to “AUTO” (page 87). H D.RANGE Lights up when dynamic range compression is activated. I SP A/SP B/ SP A+B Lights up according to the speaker system used (page 44). However, these indicators do not light up if the speaker output is turned off or if headphones are connected. J Tuner indicators Lights up when using the receiver to tune in radio stations, etc. Note “RDS” appears for models of area code CEL, CEK, ECE only. K SLEEP Lights up when the sleep timer is activated. L A.DIRECT Lights up when the receiver is processing Analog Direct signals. M MEM Lights up when a memory function, such as Preset Memory etc., is activated. N ; PL/ ; PL II/ ; PL iix “□ PL” lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “□ PL II” lights up when the Pro Logic II decoder is activated. “□ PL IIx” lights up when the Pro Logic IIx decoder is activated. However, these indicators do not light up if both the center and surround speakers are not connected and you select a sound field using the A.F.D. button. Note Dolby Pro Logic IIx decoding does not function for signals with a sampling frequency of more than 48 kHz. O BI-AMP Lights up when BI-AMP Speaker setting is set to “ON”. P EQ Lights up when the equalizer is activated. Q NEO:6 Lights up when DTS Neo:6 Cinema/Music decoding is activated. R DTS-HD “DTS-HD MSTR” lights up MSTR/ when the receiver is DTS-HD HI decoding DTS-HD Master RES Audio signals. “DTS-HD HI RES” lights up when the receiver is decoding DTS-HD High Resolution signals. S LPCM Lights up when Linear PCM signals are detected. 92GB Name Function Name Function T ANALOG Lights up when |24| Playback The letters (L, C, R, etc.) - INPUT MODE is set to channel indicate the channels being “AUTO” and no digital signal is being input through the COAXIAL, OPTICAL or HDMI jacks. - INPUT MODE is set to indicators played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). “ANALOG”. L Front Left - the “Analog Direct” is R Front Right being used. C Center (monaural) U DMPORT Lights up when DIGITAL SL Surround Left MEDIA PORT adapter is SR Surround Right V MULTI IN connected and “DMPORT” is selected. S Surround (monaural or the surround components obtained by Pro Logic Lights up when multi processing) channel input is selected. SBL Surround Back Left W HD...
Questo manuale è adatto anche per i modelli :- ()