valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
See Figure. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE NEC - NATIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ■GROUNDING CONDUCTORS (NEC SECTION 810-21) ' GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART HI 18. Power lines — An outdoor antenna should be located away from power lines. 19. AC outlets — Do not connect other audio equipment with a power .consumption larger than that specified to the AC outlet on the rear panel. Never connect other electrical units, such as an iron or toaster, to it to prevent fire or electric shock. 16. Servicing — The user should not attempt to service the unit beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 17. Outdoor antenna grounding — If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding con- Notes:--- 1. Item 3 is not required except for grounded or polarized equipment. 2. Item 17 and 18 are not required except for units provided with antenna terminals. 3. Item 17 complies with UL in the U.S.A. KR-V6040 (En) 5 System connections Make connections as shown in the diagram below. When connecting the related system components, refer also to the instruction manuals of the related components. Do not plug in the power lead until all connections are completed. ■ Connection of audio components For the connection of video components, please refer to page 20. Rear speakers Right Left Speaker system A Right Left Speaker system B Right Left FM DE-EMPHASIS/ CHANNEL SPACE switch (Except for some areas.) Refer to the 'Antenna connections* section. Notes: 1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced. 2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit. 3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. 6 KR-V6040 (En) ■ Connection of speakers Speaker terminals for general ® Push lever down.