valutazioni - 1, GPA: 3 ( )

Produttore : Kenwood File Size : 1.64 mb File Nome : Lingua di insegnamento:

These speakers recreate sound motion and atmosphere. Required for surround playback. Subwoofer : Reproduces powerful deep bass sounds. Surround back speaker : Place the speaker directly at the rear of the listening position. The optimum position depends mainly on the room condition. • Although the ideal surround system consists of all the speakers listed above, if you don't have a center speaker or a subwoofer, you can divide those signals between the available speakers in the speaker settings steps to obtain the best possible surround reproduction from the speakers you have available. * Center speaker Subwoofer Front speakers (L,R) Surround speakers (L,R) Listening position Surround back speaker Channel space switching (Except for the U.S.A., Canada, U.K., and Australia) The space between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel space setting does not match the setting in the area where the system is to be used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by referring to the following table. Area CHANNEL Space Frequency 1 U.S.A., Canada and South FM: 100 kHz American countries AM: 10 kHz 2 Other countries FM: 50 kHz AM: 9 kHz 50us AM 9kHz FM50kHz 75us AM 10kHz FM100kHz DE-EMPHASIS CHANNEL SPACE 50us AM 9kHz FM50kHz 75us AM 10kHz FM100kHz Turn the power OFF by pressing the POWER key before moving the switch level. Move switch lever to match your area with a small screwdriver or other pointed tool, then turn the power on again. 15 EN Setting up the system Setting up the system The AV AUX jacks are convenient for connection of video components AM loop antenna such as a camcorder or a video game. The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. AV AUX S VIDEO OUT S VIDEO cord VIDEO OUT AUDIO OUT S VIDEO VIDEO L-AUDIO-R Camcorder, other VCR, video game, digital camera, or portable MD player • To select the source connected to the AV AUX jacks press AV AUX key. . • When you connect the audio source such as the MD player, you AM antenna terminal connections 1Push lever. 2Insert cord. 3Release lever. FM indoor antenna The supplied indoor antenna is for temporary use only. For stable signal reception we recommend using an outdoor antenna. Disconnect the indoor antenna when you connect one outdoors. FM antenna terminal connections Insert cord. FM outdoor antenna Lead the 75. coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 75. terminal. FM 75 GND AM ANTENNA AM loop antenna FM indoor antenna Use an antenna adaptor (Commercially available) Attach to the stand FM outdoor antenna do not need to connect the video cable. • When you connect the unit and the component with the S VIDEO cord, you can get better picture quality. 16EN Setting up the system Setting up the system Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. This unit is compatible only with the [SL-16] mode. The system control operation is not available if the unit is connected in the [XS8], [XS], or [XR] connection mode. If your component has the mode select switch, set the connected components to the [SL16] mode. SYSTEM CONTROL • You may connect the system control cord to either the up or down jack. EXAMPLE: [SL16] mode connections The underlined portion represents the setting of the system control mode. [SL16] Receiver [SL16] [XS] [XS8] [XR] Cassette deck or MD recorder [SL16] [XS] [XS8] CD player [XS] Record player • In order to take advantage of the system control operations, the components must be connected to the correct jacks. To use a CD player it must be connected to the CD jacks. To use a cassette deck (or MD recorder) it must be connected to the MD/TAPE jacks. When using more than one CD player (etc.) only the one connected to the specified jacks may be connected for system control. • Some CD players and cassette decks are not compatible with the [SL16] system control mode. Do not make system connections with equipment that is not [SL16] compatible. • Some MD players are not system control compatible. You cannot make system control connections to this kind of equipment. SYSTEM CONTROL cord SYSTEM CONTROL cord Notes 1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system operations. If your equipment consists of this kind of combination, please do not connect any system control cords. Even without system control cords, normal operations can be carried out without effecting performance. 2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause ...

Scarica la tua

Per scaricare, digitare 2 cifre :