Determine the best location for the DA1957CT. There is an equalization adjustment on the DA1957CT that will affect all the distributed signals. Therefore, place the DA1957CT as equidistant to all receivers as possible. Step 2. Connect the power adapter to the DA1957CT and plug it into the power outlet. The power indicator LED on the front panel will light red. This indicates that the unit is operational. Step 3. Connect a cable from the Twisted Pair transmitter to the Input connector on the DA19

Input signals on 15-pin D female connector 1 Ground 2 Red 3 Composite Sync 4 Switch 1 (Grounded when switch is ON 5 Green 6 Ground 7 Switch 2 (Grounded when switch is ON 8 No connection 9 Blue 10 Switch 3 (Grounded when switch is ON 11 Ground 4 DISTRIBUTION AMPLIFIERS PIN No. Input signals on 15-pin D female connector 12 Vertical Sync 13 Ground 14 Ground 15 Horizontal Sync Table 4. The DA1406WM Input pin-out PIN No. Output signals on 15-pin D female connector 1 Ground 2 Red 3 Composite Sync 4 No

Extremely rugged and compact, the DA1804NT fits easily into tight spots. Using high-quality 75 ohm coaxial cable, it can drive an NTSC signal 400 ft (122 m) or more. Specifications are subject to change. See for up-to-date information. FEATURES/DESCRIPTION DA1804NT GENERAL Inputs BNC female (1) Outputs BNC female (4) Compatibility NTSC, PAL, SECAM, High Resolution Monochrome Computer Video Table 1. DA1804NT General MECHANICAL DA1804NT Material Gray 0.1” Al Top Label Lexan Height (inches) 1.0 in

These single ended signals allow the source to be distributed to large screen projectors or other displays with excellent quality at long distances. The DA1921SX is designed to be used together with a compatible CAT-5 computer video transmitter, such as model DA1920SX. The DA1921SX is connected to the transmitter using twisted pair CAT-5 UTP (Category 5, 5e, 6) type cable. The DA1921SX is compact and easy to use. It offers a CAT-5 input, two fully buffered outputs and equalization control. It is

Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1931CT and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.2 INSTALLATION • To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the DA1931CT in direct sunlight, near heaters or heat radiating appliances, or n

could void the user’s authority to operate the equipment. ABOUT YOUR DISTRIBUTION AMPLIFIER 2 The DA1203RM Distribution Amplifier is designed to allow the connection of a single computer or other video source to as many as three scan-rate compatible display devices. Though primarily designed to pass RGBS format signals, the DA1203RM can also pass RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by using the appropriate analog channels (Red, Green, Blue). The analog channel

This enables it to be compatible, with both current and older display equipment. The Sync Polarity switch reverses the polarity of the incoming sync for compatibility with various displays The DA1203RM Distribution Amplifier is a state-ofthe- art product with a video bandwidth of 350 MHz, enabling it to remain transparent to the video signal passing through it. Each output is individually buffered and is not affected by other output loading. The DA1206RM offers an internal 90-140/200240V power s

If the source offers a VGA-type 15-pin HD connector, then use a special cable - Altinex part # MS8102CA (15-pin HD Male to 5 BNC Male 6 feet cable) may be used. NOTE: You may have to use an interface (DA1910SX or VA6855WM) with your source computer to provide the appropriate signal format type and to allow the use of a local monitor. Do not use a Y-cable or monitor breakout cable to connect the computer to the DA1222AT because this will affect the quality of the high-resolution input signal. Ste

The DA1226AT offers excellent bandwidth performance (minimum 350 MHz) and a typical bandwidth of nearly 450 MHz, allowing it to remain virtually transparent to high resolution signals. Though primarily designed to pass an RGBHV signal format, the DA1226AT can also pass RGBS, RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by using the appropriate channels. The DA1226AT outputs the same sync level as it receives on its input. The DA1226AT offers a low-profile design, which

DA1902SX Mechanical ELECTRICAL DA1902SX Input Video Signal Analog Signal 1.5V p-p max Impedance 75 Ohms Input Sync Signals Horizontal, Vertical, & C-Sync TTL(+/-) Sync on Green -0.3V Impedance 10 k Ohms Output Video Signals Analog Signal Gain of 1.05 (+/-5%) Fall/Rise Time (ns) 1.4 Impedance 75 Ohms Output Sync Signals Composite Sync TTL(+/-) Sync on Green -0.3V Impedance 22 Ohms Frequency Compatibility Typical Video Bandwidth 380 MHz Minimum Video Bandwidth 350 MHz Horizontal 15-200 kHz 3 DISTR