Produttore : MTD
File Size : 761.23 kb
File Nome : 8197cc22-f0de-bde4-1d8b-e6ed14824af6.pdf
|
Facilità d'uso
Use common sense. Do not operate the chain saw when you are tired. Keep all parts of your body away from the saw chain when the motor is operating. Before you start the saw, make sure the saw chain is not contacting anything. • Disconnect the chain saw when not in use, before servicing, and when changing accessories and attachments such as saw chain and guard. • Check damaged parts. Before further use of the chain saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center, unless otherwise indicated in this instruction manual. RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION •Use extreme caution when cutting small sized brush and sapling, as slender material may catch the saw chain and be whipped toward you or pull you off balance. Do not operate a chain saw in a tree unless you are specifically trained to do so. When cutting a limb that is under tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released. Do not expose the chain saw to rain. Do not use the chain saw in damp or wet locations. Do not use the chain saw in the presence of flammable liquids or gases. • All chain saw service, other than the items listed in the user manual safety and maintenance instructions, should be performed by competent chain saw personnel. Do not attempt to repair it yourself; there are no user serviceable parts inside. • When not in use, chain saws should be stored out of the reach of children, in a dry, high or locked-up place. When storing saw, use a scabbard or carrying case. • The chain saw will do a better and safer job when used at the rate for which it was intended. • Use the right tool. Cut wood only. Do not use the chain saw for purposes for which it was not intended. For example, do not use the chain saw for cutting plastic, masonry, or non-building materials. • Use devices, such as low-kickback chain, guide bar nose guards, chain brakes and special guide bars, which reduce the risks associated with kickback. • There are no other replacement components for achieving kickback protection in accordance with CSA Z62.3. • Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released. • Do not attempt operations beyond your capacity or experience. • Never remove, modify or make inoperative any safety device furnished with your unit. • This saw is classified by CSA as a Class 2C saw. It is intended for infrequent use by homeowner’s, cottagers and campers, and for such general applications such as clearing, pruning, cutting firewood, etc. It is not intended for prolonged use. If the intended use involves prolonged periods of operation, this may cause circulatory problems in the user’s hands due to vibration. It may be appropriate to use a saw having an anti-vibration feature. • Safety clothing required by your safety organizations, government regulations, or your employer should be used; otherwise, snug fitting clothing, safety footwear, and hand and ear protection should be worn. Low-kickback saw chain is chain that has met the kickback performance requirements of ANSI B175.11991 and is in accordance with CSA Z62.3. Do not use other replacement chain unless it has met these requirements for your specific model. • Do not use any other cutting attachment or accessories. Use only original equipment manufacturer replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of our products. Failure to do so may cause poor performance and possible injury. Use only the chain and bar supplied with this product. Do not use any other cutting attachment. Use of such attachments will void your factory warranty and could result in serious bodily injury. •Never touch the chain or attempt to service the saw while the engine is running. Make sure all moving parts have stopped. Allow the chain saw to cool, as the chain can be hot. •Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the chain saw. • Do not cut near electrical cables or power lines. • Do not use the pole saw to fell a tree. Use a standard chain saw for this application. MAINTENANCE AND STORAGE • Allow the unit to cool before storing or transporting. Be sure to secure the unit while transporting. • Store the unit in a locked up and dry or high and dry place to prevent unauthorized use or damage, out of the reach of children. • Never douse or squi...