valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
Pass this manual on to whoever might acquire the appliance at a future date. - 1 - (GB) WATERING COMPUTER Safety instructions ^ Poison Hazard! Keep batteries out of the reach of children. A Explosion Hazard! Never throw used batteries into the fire. & Attention! Failure to follow these safety instructions could damage the watering computer and void your warranty. • Only use alkaline batteries. Do not use rechargable batteries. • Never recharge alkaline batteries. • Ensure that water cannot permeate into the housing. This causes damage to the appliance. • Check the charge state of the batteries and renew them if you do not use the watering computer for an extended period. • Always replace both batteries and make certain the polarity is correct. • Replace empty batteries in a timely fashion. Leaking batteries can destroy the watering computer. (GB) - 2- A Never handle leaking batteries without protection! Battery chemicals may not come into contact with your eyes or mouth. This could lead to chemical burns. Use gloves to remove leaking batteries. • Check the watering computer and its connections at regular intervals for watertightness and faultless function. • Never press the buttons with your finger nails or with sharp objects. • Reprogramme the watering computer if the batteries have been removed from the housing for an extended period. • Always keep the lid closed when you are not programming the watering computer. The lid protects the display from weather effects! Proper Use The watering computer KH4083 is intended exclusively for permitting or preventing water flow at specific times. It is intended only for use in private households and gardens. Any other use is considered improper, in particular use in drinking water systems and for growing food. - 3 - (GB) Package Contents • Watering computer KH4083 • Instructions for use Technical data Minimum rate of flow: 15l/min. Operating water pressure: 1.379-8.274 bar Power supply: 2 x 1.5 V, alkaline batteries Keypad: Splash-proof Description of the appliance Figure A O Water-tap connection (3/4") Q Battery compartment Q Connection for water-pipe (3/4") O Cover Q Keypad Q Display (GB) - 4- Display Figure B © Time display 0 Display: watering frequency O Display: low battery indication © Watering on/off S Display: programme number © Display: watering budget Preparations Inserting Batteries The battery compartment Q is located on the underside of the watering computer. Replace the batteries regularly. When the display ta Q appears, the batteries are depleted. A Only use Alkaline batteries. Do not use rechargable batteries. They do not provide enough output to operate the appliance. O Pull the battery compartment Q out of the housing. O Insert two AA-Batteries, taking note of the polarities, in the battery compartment Q. - 5- (GB) O Push the battery compartment Q back into the housing. The battery compartment Q must click in audibly. O Whilst the batteries are being exchanged, „PO" appears in the display ©. CD For as long as the PO display is blinking, the watering computer will retain its programming. If the display goes blank, the programming has also been deleted. Connecting to the water mains O Screw the inflow connector o on to a suitable 3/4" water tap (1"-external thread). O Screw the outflow connector © on to a water hose. Ensure that the outflow connector © is always pointed downwards. Setting the Clock O Open the cover ©. O Press the „M" button until a bar © appears in the display above the 0 symbol and a bar blinks under „"MON". The watering computer is now in the clock setting mode. O Press the „+" or „-" button to set the current day of the week. O Confirm your selection with the @ button. The hour value now blinks in the display ©. (GB) - 6- O Press the „+" button or the „-" button to set the current hour. O Confirm your selection with the @ button. The minute value now blinks in the display ©. O Press the „+" button or the „-" button to set the minutes. O Confirm your selection with the @ button. The clock is now set. O Press the „M" button to return to automatic mode. Operate Programming You can programme up to 8 switching sequences with different amounts of water flow-through. O Press the „M" button until a bar is shown above the ® in the display ©. The watering computer is now in the programming mode. Blinking in the display ©, to the right of the % symbol, is the notification 100%. - 7- (GB) Setting the amount of water through-flow. You can set the amount of water through-flow from 10% to 200%. O Press the „+" button or the „-" button to set the desired amount of water through-flow. O Confirm your selection with the @ button. The amount of water through-flow is controlled by the period of water flow. Examples: You have programmed a 100% water through-flow amount for 10 minutes: the watering computer permits through-flow for 10 minutes. You have program...