valutazioni - 3, GPA: 3.7 ( )

Produttore : Husqvarna File Size : 3.02 mb File Nome : Lingua di insegnamento:

Fill the tank with “Storage/Winter storage” fresh fuel. Blue or voluminous Contaminated or incorrect fuel Clean tank, sludge reservoir and blue-white exhaust empty carburetor. Fill the tank with proper fuel. Black exhaust Choke left on open choke valve Clogged air filter Clean or replace the air filter Carburetor problems Contact an authorized service workshop. Ignition system Wrong spark plug type Replace the spark plug Build-up on electrodes. Short Check electrode gap and clean or circuit. replace spark plug. Faulty ignition unit. Contact an authorized service workshop. Low compression Serious interior engine damage or Contact an authorized service faulty valves. workshop. SToRAGE Winter Storage At the end of the season, the machine should be readied for storage (or if it will not be in use for longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function. Fuel stabilizers are an acceptable option to reducing sticky residues during storage. If alkylate gasoline (Aspen) is used, stabilizers are unnecessary because this fuel is stable. However, you should avoid switching between regular and alkylate gasoline as sensitive rubber components can harden. Add stabilizer to the fuel in the tank or in the storage container. Always use the mixing ratios specified by the manufacturer of the stabilizer. Run the engine for at least 10 minutes after adding the stabilizer so that it reaches the carburetor. Do not empty the fuel tank and the carburetor if you have added stabilizer. WARNING! Never store an engine with fuel in the tank indoors or in poorly ventilated spaces where fuel vapor can come in contact with open flame, sparks or a pilot light such as in a boiler, hot water tank, clothing drier, etc. Handle the fuel with caution. It is very flammable and careless use can cause serious damage to person and property. Drain the fuel into an approved container outdoors and far away from open flame. Never use gasoline for cleaning. Use a degreaser and warm water instead. To ready the machine for storage, follow these steps: 1. Clean the machine carefully, particularly the chassis and working equipment. Mend damage to the paint to prevent rust. 2. Inspect the machine for worn or damaged parts and tighten any nuts or bolts that may have become loose. 3. Change the engine oil; dispose of properly. 4. open the fuel valve. Empty the fuel tank and the carburetor. Fuel tank plug and filter 5. Close the fuel valve. 6. Remove the spark plug and pour about a tablespoon of engine oil in the cylinder. Turn over the engine so that the oil is evenly distributed and then refit the spark plug. 7. Lubricate all grease nipples, joints and shafts as described in the chapter “Lubrication/Lubrication Schedule”. 8. Store the machine in a clean, dry place and cover for extra protection. Service When ordering spare parts, please specify the purchase year, model, type, and serial number. Always use genuine Husqvarna spare parts. An annual check-up at an authorized service workshop is a good way to ensure that your machine performs its best the following season. TECHNICAL DATA 18" POWER RAKE Engine Briggs & Stratton Primary drive V-belt Dethatching width 18" Clutch control Handle-mounted with automatic safety declutching Clutch Belt tightener with spring return and idling pulley mechanism Depth setting Adjustable depth control with lever mechanism Flail blade reel 26 case-hardened steel blades with 5/8" (1.6 cm) spacers 1/8" x 1" x 3." (0.3 x 2.5 x 8.9 cm) Delta blade reel 24 austempered 12-gauge steel blades with 2" (5 cm) spacers Handle Folding, ergonomic design with soft grip Weight Dethatcher 144 lbs (65.3 kg) Width 28" (71 cm) Length 26." (68 cm) without handle 50" (127 cm) with handle Height 26" (61 cm) without handle 40" (102 cm) with handle Distance between axles 17." (45cm) center to center Bearings ." closed flanged cartridge Wheels, Front and Rear Front 8" x 1." TECHNICAL DATA 22" POWER RAKE Engine Briggs & Stratton or none Primary drive V-belt Dethatching width 22" Clutch control Handle-mounted with automatic safety declutching Clutch Belt tightener with spring return and idling pulley mechanism Seeding Width 22" (55.8 cm) Depth setting Adjustable depth control with lever mechanism Flail blade reel 32 case-hardened steel blades with 5/8" (1.6 cm) spacers 1/8" x 1" x 3." (0.3 x 2.5 x 8.9 cm) Delta blade reel 30 austempered 12-gauge steel blades with 2" (5 cm) spacers Handle Folding, ergonomic design with soft grip Catcher Bag 8 ft3 (0.23 m3) synthetic material on frame with wheels Seed hopper 1368 in3 (22.3 L) or approx. 30 lbs (13.6 kg) seed, self-propelled stirring, inspection window Weight Dethatcher 144 lbs (65.3 kg) with seed hopper 165 lbs (74.8 kg) with catcher bag 157 lbs (71.2 kg) Width 30." (71 cm) Length 26." (68 cm) without handle 50" (127 cm) with handle Height 27" (61 cm) without handle 40" (102 cm) with handle Dist...

Scarica la tua

Per scaricare, digitare 2 cifre :