valutazioni - , GPA:
(
)
)
Produttore : Cornelius
File Size : 155.84 kb
File Nome : 001767.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
Retain these instructions as part of your equipment manual. INSTALLATION PROCEDURE FOR FLAT FLOOR DRAINS 1. Mount the wire form support in the center of the floor drain grid and clamp it s four legs of the support onto the drain grid securely. If necessary, reform the legs to fit and attach firmly to the drain grid. The clamps are omitted for clarity on the first two illustrations. 2. Place the plastic splashguard collar over the wire form support. 3. The adjustable clamps will accomodate 1/2- inch, 3/4-inch, and 1-inch I.D. either soft or ridgid (hard) PVC tubing. Squeezing the two tabs together that are located on the clamp-locking collar will loosen a tightened clamp. © IMI Cornelius Inc; 1999 Rev B Revised: 12/22/99 November 4, 1999 620918801 4. Place each drain line a minimum of 2--inches up from the wire form feet and tighten each clamp bolt in place to firmly secure the drin line(s) in place. The collar is omitted for clarity. 5. Check for kinks and eliminate them. If necessary, add appropriate size 45* barb to barb connectors. INSTALLATION PROCEDURE FOR FLOOR DRAINS WITH FUNNELS 6. Mount the wire form support in the center of the floor drain funnel and clamp it s four legs of the support onto the drain funnel securely. If necessary reform the legs to fit and attach firmly to the drain funnel. 7. The funnel takes the place of the plastic splashguard collar. The collar is unnecessary and can be discarded. 8. The adjustable clamps will accomodate 1/2-inch, 3/4-inch, and 1-inch I.D. either soft or ridgid (hard) PVC tubing. Squeezing the two tabs together that are located on the clamp-locking collar will loosen a tightened clamp. 9. Place each drain line 2-inches up from the top of the funnel and tighten each clamp bolt in place to firmly secure the drain line(s) in place. 10. Check for kinks and eliminate them. If necessary, add appropriate size 45* barb to barb connector(s). 620918801 2...