valutazioni - 6, GPA: 4.2 ( )

Produttore : American Standard File Size : 4.02 mb File Nome : hp_exposed_with_riser_rail.pdf Lingua di insegnamento:

Tow remove the temperature control disc, together with the wavy washer. The control disc houses the maximum temperature stop mechanism (fig.80). To increase the temperature stop setting, reposition the temperature stop mechanism clockwise within the arc of the grooves (fig.80). To decrease the temperature stop setting, reposition the stop mechanism anti-clockwise within the arc of the grooves. When the stop mechanism is set at the preferred position, refit the temperature control disc making sure the name 'TRITON' is at the bottom. Replace the wavy washer, then refit the temperature control knob, making sure it is replaced in the same attitude as when removed (i.e. 12 o'clock position). Refit the central screw and replace the knob trim. IMpoRTANT: Only adjust the maximum temperature stop when the hot water is at its usual supply temperature. 26 Combi HP thermostatic mixer shower Ref. Description SPARE PARTS Part No. 1. HP valve cartridge (built-in valve) 2. HP cartridge and brass housing (exposed valve) 3. Outlet adaptor chrome gold 4. Inlet elbow assembly 5. Outlet blanking plug 6. Cartridge 'O' rings 7. Knob set - white 8. Knob trim 9. Cover shroud white (exposed valve) chrome (exposed valve) gold (exposed valve) 10. Trim ring white chrome gold gold (flush) 11. Trim sets white chrome gold 12. Cover plate white (built-in valve) chrome (built-in valve) gold (built-in valve) 13. Mounting plate (built-in valve) - Outlet pipe white chrome effect gold effect 83304970 83304960 7031462 7031463 83303810 7031460 83303710 83304810 7051466 7041444 7041445 7041446 7051441 7051442 7051443 7051477 83303680 83303670 83303690 7051448 7051449 7051450 7051447 TAS00404 TAS00004 TAS00304 27 Combi HP thermostatic mixer shower SPARE PARTS Ref. Description Part No. 14. Bulkhead assembly white chrome effect gold effect 83303780 83303770 83303790 - Trim disc (use with flush gold effect) 7051451 15. Inlet & outlet nuts 83303660 16. Spanner 7011766 - Flow regulator 22003530 17. Check valve/sleeve assembly 83303810 18. wall bracket 7011453 19. Check valve tool 7051476 20. Flushing cartridge (available on request) 7052032 21. Tutted male thread fitting 7032915 22. Tamperproof fixed head built-in 96200250 23. Tamperproof fixed head exposed 96200240 - Fixed head assembly - white 22450060 - Fixing kit 22009490 Flexible hoses available in the following sizes: 1.00 m in white, chrome and gold 1.25 m in white, chrome and gold 1.75 m in chrome only - PVC shroud (flush fit only) 7052165 - Screw pack 83303800 - Extended control lever (Can be fitted easily to make the controls easier to use. Available on request from Triton Customer Service). 28 Combi HP thermostatic mixer shower Problem/Symptom Cause FAULT FINDING Action/Cure 1 Water too hot. 1.1 Not enough cold water flowing through shower. 1.1.1 Turn the control knob anti-clockwise. 1.2 Increase in the ambient cold water temperature. 1.2.1 Turn the control anti-clockwise. 1.3 High volume of cold water drawn off elsewhere. 1.3.1 Reduce the simultaneous demand from supply — make sure a dedicated supply to mixer. 1.4 Excessive flow rate. 1.4.1 Contact Customer Service for advice on flow regulators. 1.5 Dirty check valves. 1.5.1 Clean - refer to 'Flushing Procedure'. 2 Water too cold. 2.1 Not enough hot water flowing through shower. 2.1.1 Turn the temperature control clockwise. (Override the max. temperature stop if necessary). 2.2 Decrease in the ambient cold water temperature. 2.2.1 Turn the temperature control clockwise. (Override the max. temperature stop if necessary). 2.3 Not enough hot water supplied from the heating appliance. 2.3.1 Make sure heating cylinder is set to maximum hot water output. 2.4 Excessive flow rate. 2.4.1 Contact Triton Customer Service for advice on flow regulators. 2.5 Dirty check valves. 2.5.1 Clean - refer to 'Flushing Procedure'. 3 Water does not flow or shower pattern collapses when another outlet is turned on. 3.1 Water supplies cut off. 3.2 Shower unit blocked. 3.3 Showerhead blocked. 3.4 Reduced flow rate when other outlets in use. 3.1.1 Check water elsewhere in house and if necessary contact local water company. 3.2.1 Inspect the flow regulators (if fitted) and the check valves - refer to 'Flushing Procedure'. Clean if necessary. 3.3.1 Clean showerhead. 3.4.1 Reduce the simultaneous demand — make sure a dedicated supply to mixer. 3.4.2 Make sure service valves are fully open. 29 1 Combi WPthermostatic mixershower 1 FAULT FIND4ING Problem/Symptom Cause Action/Cure 4 Water too cold or too hot. 4.1 Water supply blocked or restricted. 4.1.1 lurn off the shower and consult a competent plumber or contact Triton Customer Service. 5 Water does not 5.1 Blockage in 5.1.1 Turn off the shower and consult a flow or shower pipework. suitably competent plumber. pattern collapses when another outlet is turned on. 6 Shower will not 6.1 Pi...

Scarica la tua

Per scaricare, digitare 2 cifre :