valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
C 9 10 ADJUSTMENTS a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup. See Step 10 for water level adjustment method b. If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip (see Fig. 9A) and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught. 11 CARE AND CLEANING When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish. WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage. American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite). ! TANK LEVER "S" CLIP FLUSH VALVE LINK TOP ARM NIPPLE Diagram 1 PARTS FOR WATER CONNECTION (SEE STEP 8a) CONE WASHER VALVE BODY WATER LEVEL ADJUSTMENT CLIP FLAPPER THREADED SHANK SHANK WASHER COUPLING NUT (HAND TIGHT ONLY) FILL VALVE FLOAT CUP CRITICAL LEVEL MARK ("C.L.") MUST BE 1" ABOVE OVERFLOW PIPE REFILL TUBE ADJUSTABLE HEIGHT LOCK NUT Fig. 9A Turn on water supply. Adjust water to desired level by squeezing water level adjustment clip and moving FLOAT CUP up or down along stainless steel link. CADET REPAIR PARTS LIST NOTE: "XXX" represents color options. Specify when ordering. DESCRIPTION COMPONENT QTY DESCRIPTION QTYPART NUMBER Bolt Cap Kit Trip Lever Water Control Assembly Flush Valve Assembly Flapper Assembly 034783-XXX0A 047242-XXX0A 738565-410.0070A 738683-007OA 738151-007OA 2 1 1 1 1 Tank Cover Seat and Cover - Round Front Seat and Cover - Elongated Seat Post Mtg. Kit 735093-400.XXX 5322.011.XXX 5324.019.XXX 760030-100.XXX 1 1 1 1 TRIP LEVER TANK COVER BOLT CAPS SEAT POST MTG. KIT SEAT AND COVER (INCLUDES MTG. KIT) FLAPPER ASSEMBLY FLUSH VALVE FLUIDMASTER 9 10 ADJUSTMENTS a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup. See Step 10 for water level adjustment method b. If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip (see Fig. 9A) and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught. 11 CARE AND CLEANING When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish. WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage. American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite). ! TANK LEVER "S" CLIP FLUSH VALVE LINK TOP ARM NIPPLE Diagram 1 PARTS FOR WATER CONNECTION (SEE STEP 8a) CONE WASHER VALVE BODY WATER LEVEL ADJUSTMENT CLIP FLAPPER THREADED SHANK SHANK WASHER COUPLING NUT (HAND TIGHT ONLY) FILL VALVE FLOAT CUP CRITICAL LEVEL MARK ("C.L.") MUST BE 1" ABOVE OVERFLOW PIPE REFILL TUBE ADJUSTABLE HEIGHT LOCK NUT Fig. 9A Turn on water supply. Adjust water to desired level by squeezing water level adjustment clip and moving FLOAT CUP up or down along stainless steel link. CADET REPAIR PARTS LIST NOTE: "XXX" represents color options. Specify when ordering. DESCRIPTION COMPONENT QTY DESCRIPTION QTYPART NUMBER Bolt Cap Kit Trip Lever Water Control Assembly Flush Valve Assembly Flapper Assembly 034783-XXX0A 047242-XXX0A 738565-410.0070A 738683-007OA 738151-007OA 2 1 1 1 1 Tank Cover Seat and Cover - Round Front Seat and Cover - Elongated Seat Post Mtg. Kit 735093-400.XXX 5322.011.XXX 5324.019.XXX 760030-100.XXX 1 1 1 1 TRIP LEVER TANK COVER BOLT CAPS SEAT POST MTG. KIT SEAT AND COVER (INCLUDES MTG. KIT) FLAPPER ASSEMBLY FLUSH VALVE FLUIDMASTER -3 -730481-100 Rev. C 12 • Make sure water supply is off. Remove valve TOP by lifting arm and rotating top and arm 1/8 turn counterclockwise, pressing down slightly on cap. IMPORTANT: Always clear sand and rust from system. LIFT ARM FIRST LIFT ARM FIRST • While holding a container over the uncapped VALVE to prevent splashing, turn water supply on and off a few times. Leave water supply off. • Replace TOP by engaging lugs and rotating 1/8 turn clockwise. MAKE CERTAIN TIP IS TURNED TO THE LOCKED POSITION. VALVE MAY NOT TURN ON IF TOP IS NOT FULLY TURNED TO THE LOCKED POSITION. For troubleshooting information please c...