. Specification sheet revised 1/2009 14019001 14019621 14019831 14019861 14019921

Dimensions are for reference only. See current full-line price book or for finish options and product availability. DSP-K-102 Rev. A STANDARD SPECIFICATIONS: • Solid brass fabricated body. • 9 1/4" (235 mm) long spout swings 360°. • Lever handle shall return to neutral position when faucet is turned off. • Red and blue button on handle. • Control mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. •

Standard on models 100-WF10, 110-WF10 and 400-10. • Lever handle. Control mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. • Control handle shall return to neutral position when valve is turned off. • Model 400 series with spray attachment has antisiphon device as integral part of valve body. • Model 100, 110 and 400 series without dispenser can be field converted from 8" (203 mm) to 6" (152 mm) cente

1. After installation is complete, peel off the PROTECTIVE FILM (1) from the sensor. Standing to one side, block the sensor with your hand for 10 seconds. Remove your hand and listen for audible “click” from within the valve. 7 9 6 2 5 8 10 121mm,+13mm, -6mm (4-3/4)(+1/2, -1/4)Fig. 8b 2. Remove COVER (2) from SUPPLY STOP (3).Turn on water supply 1/4 turn to 1/2 turn(CCW) and test for leaks. Note: Unit may flush for approximately 5 to 10 sec. when water is first turned on. If flow persists, turn

Raindance S 150 AIR 3-Jet Handshower Product Features Oversized spray face AIR injection technology Rubit™ cleaning system Three spray modes: AIR, Whirl AIR, 86 no-clog spray channels 2.5 gpm max. Code Compliance This unit meets or exceeds the following: • ASME A112.18.1 • CSA B125.1 • Listed by IAPMO • Approved for use in Massachusetts Available Finishes Chrome Brushed Nickel The measurements shown are for reference only. Products and specifications shown are subject to change with

shown are subject to change without notice. Specification sheet revised 2/2008

ulement para 10m flexo sólo XX = Please see page 31.1 for finish 31 23 XX = Description des codes couleur page 31.1 iT»TlKt»T7»] 8/2008 XX = Para el código de acabados ver página 31.1