valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Maximum Idle Time (in seconds): Enter the maximum idle time (in seconds) before the router disconnects the PPPoE session. Auto-reconnect (check box): Checking this box enables the router to automatically reconnect to the Internet once the connection is dropped. Click Save to save any changes or click Undo to cancel any changes. 18 PPTP Enter the information provided by your ISP in the respective fields. Connection ID (optional): Some ISPs require the use of a connection ID. Maximum Idle Time (in seconds): Enter the maximum idle time (in seconds) before the router disconnects the PPPoE session. Auto-reconnect (check box): Checking this box enables the router to automatically reconnect to the Internet once the connection is dropped. Click Save to save any changes or click Undo to cancel any changes. 19 Virtual Computers The Virtual Computer function enables you to map the Global IP (WAN IP address) assigned by your ISP to the Local IP (LAN IP address) of your computer. Global IP: Enter the global IP address (WAN IP) assigned by your ISP. Local IP: Enter the local IP address (LAN IP) of your computer you wish to map to. Enable (check box): Check this box to enable the Virtual Computer function. Click Save to save any changes or click Undo to cancel any changes. 20 5.2.2 DHCP Server This page allows you to configure the DHCP service of the router. DHCP assigns dynamic IP address to all the network devices connected to the router. DHCP Server: Select either to Enable or Disable the DHCP service (Default is Enable). IP Pool Starting Address: Enter the start of the IP pool range. IP Pool Ending Address: Enter the end of the IP pool range. Domain Name: Enter the domain name of your network (optional). Click on the More>> button to see the following fields. (The following fields are optional). Primary DNS: Enter the IP address of your network’s Primary DNS server. Secondary DNS: Enter the IP address of your network’s Secondary DNS server. Primary WINS: Enter the IP address of your network’s Primary WINS server. Secondary WINS: Enter the IP address of your network’s Secondary WINS server. Gateway: Enter the IP address of your network’s Gateway. Click Save to save any changes or click Undo to cancel any changes. 21 Clients List The Clients List displays all the DHCP clients currently connected to the router. To perform the first two functions, select a client from the list first. Wake up: Sends a wake up packet to the target client. The target client must support the wake up function. Delete: Deletes the client from the list. Back: Returns to the previous page. Refresh: Updates the Clients List. 5.2.3 Wireless This page allows you to configure the router’s wireless security. By default the wireless encryption is disabled. It is recommended that you enable encryption for your wireless connection. Network ID (SSID): Type an SSID in the text field. The default SSID is default. The SSID of any wireless clients must match the SSID typed here in order for the wireless clients to access the router. 22 Channel: Select a transmission channel for wireless communications. The channel of any wireless clients must match the channel selected here in order for the wireless clients to access the router. Security: Select the best encryption method supported by your wireless network adapter. Disable: No wireless encryption enabled. WEP: Select to enable WEP encryption. Select to enable either 64 bit or 128 bit encryption. WEP Key 1 ~ Key 4: Enter a value for each key. For 64 bit encryption, use 10 Hex characters (0-9, A-F). For 128 bit encryption, use 26 Hex characters (0-9, A-F). Use the radio button to select which key you want to activate. All wireless clients must use the same key number with the identical value. Click Save to enable the changes. 23 802.1x and RADIUS: Select this option only if you are using a RADIUS server for authentication. Encryption Key Length: Select either 64 bit or 128 bit encryption. RADIUS Server IP: Enter the IP address of your RADIUS server. RADIUS port: Enter the port number of your RADIUS server. RADIUS Shared Key: Enter the RADIUS shared key. WPA-PSK: Select this option if your wireless network adapter supports WPA. Preshare Key: Enter a preshare key (password) for your wireless encryption. Once you have set the preshare key, your WPA enabled wireless network adapter must also use the same preshare key to connect to the router. 24 WPA: Select this option only if you are using WPA with a RADIUS server for authentication. RADIUS Server IP: Enter the IP address of your RADIUS server. RADIUS port: Enter the port number of your RADIUS server. RADIUS Shared Key: Enter the RADIUS shared key. 5.2.4 Change Password This page allows you to change the router’s login password. It is recommended that you change the login password for extra security. Old Password: Enter the current login password. New Password: Enter the new login password. Reconfirm: Enter the new login password again. Click Save to save any chan...