valutazioni - 4, GPA: 4.8 ( )

Produttore : 3Com File Size : 2.03 mb File Nome : UsrGuide.pdf Lingua di insegnamento:

Enter the directory in the Copy Files From entry box (usually C:\WINDOWS\OPTIONS\CABS), and then click OK. Files are copied. You are prompted for EtherDisk diskette 2. 5 Make sure that EtherDisk diskette 2 is in drive A, and then click OK. Files are copied. You are prompted to restart the PC. 6 Remove EtherDisk diskette 2 from drive A, and then click Yes to restart the PC. You must restart the PC to complete the installation. The installation is complete. Go to “Verifying Successful Installation” later in this chapter to confirm that the NIC is properly installed. After Windows restarts, double-click the Network icon in the Windows Control Panel and make sure that the configuration settings are properly set for your network environment. Contact your system administrator for assistance. CHAPTER 3: WINDOWS 95/98 AND WINDOWS NT DRIVER INSTALLATION CHAPTER 3: WINDOWS 95/98 AND WINDOWS NT DRIVER INSTALLATION Windows 98 If you encounter problems during the installation, see the WIN98.TXT file located in the HELP directory on EtherDisk diskette 3 for troubleshooting tips. Before installing the NIC driver and software: ¦ Make sure that you have run the preinstallation program, as described in Chapter 2. ¦ Make sure that the NIC is installed in the PC and that it is connected to the network. ¦ Make sure that you have the Windows 98 installation files. These files may be on a CD or diskettes, or they may have been copied to your hard drive when Windows 98 was installed on your PC. To install the NIC driver and software on a PC running Windows 98: 1 Turn on the power to the PC. Windows 98 detects the NIC. The Add New Hardware Wizard (Figure 5) starts. Figure 5 Add New Hardware Wizard 2 Insert EtherDisk diskette 1 in drive A, and then click Next. Installing the Driver 31 Installing the Driver 31 3 Select Search for the best driver for your device (Recommended), and then click Next. 4 Select Floppy disk drives, and then click Next. Windows finds the driver file for the device. 5 Click Next. Files are copied. If the Insert Disk dialog box appears, prompting you to insert EtherDisk diskette 1, click OK. You are prompted for EtherDisk diskette 2. 6 Remove EtherDisk diskette 1 from drive A, insert EtherDisk diskette 2, and then click OK. Files are copied. You are prompted for the Windows 98 CD. 7 Insert the Windows 98 CD or diskette, and then click OK. If you do not have the Windows 98 CD or diskette, but the Windows 98 installation files are on your hard drive, click OK. Enter the directory in the Copy Files From entry box (usually C:\WINDOWS\OPTIONS\CABS), and then click OK. Files are copied. You are prompted for EtherDisk diskette 2. 8 Make sure that EtherDisk diskette 2 is in drive A, and then click OK. Files are copied. 9 Click Finish. You are prompted to restart the PC. 10 Remove EtherDisk diskette 2 from drive A, and then click Yes to restart the PC. You must restart the PC to complete the installation. The installation is complete. Go to “Verifying Successful Installation” later in this chapter to confirm that the NIC is properly installed. After Windows restarts, double-click the Network icon in the Windows Control Panel and make sure that the configuration settings are properly set for your network environment. Contact your system administrator for assistance. Windows NT 4.0 If you encounter problems during the installation, see the WINNT.TXT file located in the HELP directory on EtherDisk diskette 3 for troubleshooting tips. Before installing the NIC driver and software: ¦ Make sure that you have run the preinstallation program, as described in Chapter 2. ¦ Make sure that the NIC is installed in the PC and that it is connected to the network. To install the NIC driver and software on a PC running Windows NT 4.0: 1 Turn on the power to the PC. 2 Double-click the My Computer icon, then the Control Panel icon, and then the Network icon. The Network window appears. 3 Click the Adapters tab. If networking has not been installed on your PC before, Windows NT asks you if you want to install networking. Click Yes. See the WINNT.TXT file located on EtherDisk diskette 3 or your Windows NT documentation for instructions. 4 Click Add. The Select Network Adapter dialog box appears. 5 Click Have Disk. The Insert Disk dialog box appears. 6 Insert EtherDisk diskette 1 in drive A. Make sure that A:\ appears in the entry box, and then click OK. The OEM Option dialog box appears. 7 Make sure that the 3Com EtherLink NIC is selected, and then click OK. Files are copied. You are prompted for EtherDisk diskette 2. Installing the Driver 33 Installing the Driver 33 8 Remove EtherDisk diskette 1 from drive A, insert EtherDisk diskette 2, and then click OK. Files are copied. The Adapters tab of the Network screen appears. The name of the installed NIC appears in the list of network adapters. 9 Click Close. ¦ If the Microsoft TCP/IP Properties screen appears, enter the requested information for your network environment. Refer to your system...

Scarica la tua

Per scaricare, digitare 2 cifre :