valutazioni - 3, GPA: 5
(
)
)
|
Facilità d'uso
Trademarks and Registered Trademarks Precautions • Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. • Do not attempt to disassemble the apparatus. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance. • Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners. • Do not strike or give a strong shock to the apparatus. It may cause damage or allow water to enter the apparatus. • Pay attention to static electricity Make certain to keep boards inside the anti-static sack until it is installed. Put your hand on a metallic surface, other than the boards to discharge static electricity before installation. Do not touch components mounted on the boards directly by hand. Hold only both edges of the boards when installing. References Along with this document, refer to Central Processing Unit controls, their functions, and switch settings. WJ-MPU955A Operating Instructions for major operating Preface Network Board WJ-PB65E01 is designed for the connection expansion of Matrix Switcher WJ-SX650 Series. with Central Processing Unit WJ-MPU955A and system Features • With this board, the network connection between Central Processing Unit WJ-MPU955A and Matrix Switcher WJ-SX650 Series becomes available to expand the system composition. Up to 512 cameras and 64 monitors become connectable. Major Operating Controls and Their Functions Front View NETWORK OUT X-1 ALARM OUT 2 ALARM OUT 1 SERIALVS OUT VS IN VS OUT (THRU) Video Output Board 1 Only 10/100 BASE-T q r yt e w q Ethernet Port (10/100BASE-T) This port is used for connection with Central Processing Unit WJ-MPU955A via an Ethernet network. LINK indicator: This indicator lights up when the matrix switcher is linked to a network through this port. ACT indicator: This indicator lights up when the matrix switcher receives or sends data through this port. LINK indicator ACT indicator w Alarm Output Ports 1, 2 (ALARM OUT 1, 2) Supplies alarm output signals controlled by Central Processing Unit WJ-MPU955A. Note: Refer to WJ-SX650 Series Operating Instructions for the ALARM OUT port details. (Pin Nos. 3, 5, 7, 9, 12, 14, 16, 18, 36, and 37 are unavailable.) e VS Input Connector (VS IN) Accepts a VS input signal from an external device. r VS Output Loop-thru Connector (VS OUT (THRU)) Loops through VS input signals supplied to e. t VS Output Connector (VS OUT) Supplies VS output signals to external devices. While e is accepting a VS input signal, t supplies an output signal synchronizing the VS input signal. While e is not accepting the VS input signal, t supplies an internal synchronization output signal. y Serial Port (SERIAL) Connects to a PC. 3 Board Mounting Procedure The following example is the procedure to mount a network board into the OUT X-1 slot of WJ-SX650 Series. Notes: • This network board can be inserted into the OUT X-1 slot only. • Before the procedure, power off WJ-SX650 Series. • Remove the screws and fixing brackets surely when dismounting. • Fix the screws surely when mounting. • Do not hit the boards against the chassis of WJ-SX650 Series. 1. Remove the front panel by loosening the screws. 2. Dismount the video output main board from the front side. 3. Dismount the OUT X-1 board from the rear side. 4. Mount the network board into the OUT X-1 slot, and fix the board with the supplied screws. 5. Mount the video output main board by hooking the board stoppers on the board stopper angles at the front side, by pushing down the board stoppers, and by fixing the screws. Then, attach the front panel. Note: When mounting, insert the main board surely into slits. Matrix Switcher WJ-SX650 OPERATE Video output main board Fixing brackets (x4) Screws (x8) SIGNAL GND SIGNAL GND TERM.ON ON MODE TERM.OFF MODE DATA 4 HDR4/TMNL8 HDR2/TMNL4 DATA 3 HDR3/TMNL7 HDR1/TMNL3 DATA 2 TMNL6 TMNL2 DATA 1 TMNL5 TMNL1/PS DATA Video Output Board 2 Video Output Board 1OUT X-1 board Fixing brackets (x2) Screws (x2) SIGNAL GND SIGNAL GND TERM.ON ON MODE TERM.OFF MODE DATA 4 HDR4/TMNL8 HDR2/TMNL4 DATA 3 HDR3/TMNL7 HDR1/TMNL3 DATA 2 TMNL6 TMNL2 DATA 1 TMNL5 TMNL1/PS DATA Video Output Board 2 Video Output Board 1 Network board Board stopper angle Board stopper • Mount the main board into the slot. • Fix the board with the screws (x3). • Attach the fixing brackets (x4) with the screws (x8). Fixing brackets (x4) Hook the board stoppers on th...