valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Apparecchiature di rete - WNR1500 (3.03 mb)
Apparecchiature di rete - WNR1500 (1.24 mb)
Facilità d'uso
Modem or Cable Internet DSL Step 4: Connect the power adapter to the router, then plug it into an outlet. Wait until the Wireless LED turns solid green. If none of the LEDs turn on, make sure the router is connected to a working outlet. Step 2: Connect one end of the blue Ethernet cable to your modem, and the other end to the Internet port on your router. before connecting your modem to power. (not included) N300 Wireless Router with External Antennas Step 5: Connect your computer to the router. Use another Ethernet cable to establish a wired connection as shown in this diagram. Optionally, connect wirelessly by using the preset wireless security settings located on the bottom label. Step 3: Plug in, then turn on your modem. Wait approximately 2 minutes until your modem turns on. If your modem has a battery backup, first remove and reinsert the battery Step 6: Open a browser. If the Web page does not display, close and re-open the browser and enter in the address bar, or check the “Troubleshooting” section in the User Guide. Preset Wireless Security This product has a unique WiFi network name (SSID) and network key (password). The default SSID and network key (password) are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset WiFi network name (SSID) and network key (password). If you do change the settings, the information on the bottom of the product does not apply. Find the preset Wireless Settings on your router and record them here: WiFi network name (SSID) _______________________________ Network key (password) _________________________________ If you change the preset wireless settings, record them here: Wireless network name (SSID) _______________________________ Network key (password) _____________________________________ If necessary to retrieve or update your password, type in a Web browser, and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. May 2012 Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset WiFi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it), and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens: 1. Press the WPS button on the back of the router. The WPS LED on the front of the router will start to blink. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work. Technical Support Thank you for selecting NETGEAR products. After installing your device, register at so you can use our telephone support service. Also go to for product updates, additional documentation, and support. For the free Live Parental Controls centralized Internet site filtering software for yourrouter, download from: For additional features, log in to your router at: For GNU General Public License (GPL) related information, go to WARNING: Do not stack equipment, or place equipment in tight spaces, in drawers, or on carpets. Make sure your equipment is surrounded by at least 2 inches of air space. Internet STATUS GOOD Network Map Number of devices 16 Parental Controls WiFi Connection STATUS Connected Router Settings Click here ReadySHARE Click hereClick here Download the free DesktopNETGEAR Genie Automatically fix common network problems and easily manage your home network connections. NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its su...