valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Then, perform a factory default reboot as described in Boot Menu on page 15. Note: This process erases all data and reformats the previously formatted disk to X-RAID. If you want to preserve the data on the disk, you need to move the data to an external drive before using the previously formatted disk in your ReadyNAS system. ReadyNAS system is operating with one or more disks With the system running, insert the disk in an empty disk bay as described in Adding a Disk on page 27. The system automatically formats the disk in the same format as your existing disks. Note: This process erases all data on the previously formatted disk. If you want to preserve the data on the disk, you need move the data to an external drive before using the previously formatted disk in your ReadyNAS system. To obtain support from NETGEAR technical support, you must use previously formatted disks that appear on the NETGEAR Hardware Compatibility List. The list is available at Adding a Disk You can add a hard disk to an empty disk bay. You do not need to shut down your system before adding a disk. If you are adding a previously formatted disk to your Duo or NV+, see the precautions in Previously Formatted Disks on page 26. Note that the tray design on your system might vary from the design pictured. 1. Press the disk tray release latch. The tray handle pops out. 2. Pull out the disk tray, place the new disk on the tray, and assemble the disk and tray with the screws that came with your system. Make sure that the hard disk connectors face the interior of the disk bay. 3. Slide the disk tray back into the system, and press the handle to secure the disk. The volume automatically synchronizes with the new disk in the background. This might take several hours, depending on the disk size. You can continue to use your ReadyNAS, although access is slower until the volume synchronization finishes. You are notified by email when the process is complete. If you are adding disks to a diskless system, see the ReadyNAS RAIDiator 4.1 Software Manual, which is available at for information about using RAIDar to discover your system on your local area network for the first time. Failed Disk Notification If a disk fails, you are notified by email. Email alerts need to be set up for notifications to be sent. In addition, ReadyNAS FrontView provides information about the failed disk. NETGEAR recommends replacing a failed disk with the same disk model. Use ReadyNAS FrontView to determine the disk vendor and model used in your system. For information about setting up email alerts and using ReadyNAS FrontView, see the ReadyNAS RAIDiator 4.1 Software Manual, which is available at No matter how many hard drives are installed in your system, ensure that all disk trays remain in the drive bays to maintain adequate airflow. Replacing a Disk In the case of a failed disk, the system provides email alerts and status messages about the need to replace a disk. Your system supports hot-swap bays, so you do not need to power down your system when replacing a disk. If you are replacing a ...
Questo manuale è adatto anche per i modelli :Apparecchiature di rete - RND2110v1 (1.73 mb)
Apparecchiature di rete - RND2120v1 (1.73 mb)
Apparecchiature di rete - RND2150v1 (1.73 mb)
Apparecchiature di rete - RND2175v1 (1.73 mb)